VV-SWC-21 - Pressure washer Vevor - Free user manual and instructions
Find the device manual for free VV-SWC-21 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Brand | Vevor |
| Model | VV-SWC-21 |
| Power Supply | 120V AC / 60Hz |
| Rated Power | 1800W |
| Maximum Pressure | 2000 PSI |
| Flow Rate | 1.6 GPM |
| Power Cord Length | 20 feet |
| High-Pressure Hose Length | 20 feet |
| Water Connection | Standard garden hose (3/4 inch) |
| Motor Type | Universal brushed motor |
| Pump Type | Axial cam pump |
| Nozzle Set | 0°, 25°, 40° and soap nozzle |
| Detergent Tank | Built-in 1-liter tank |
| Dimensions (L x W x H) | 14.2 x 11.8 x 20.5 inches |
| Weight | 18.7 lbs |
| Portability | Two wheels and foldable handle |
| Safety Features | GFCI plug, trigger lock, thermal overload protection |
| Maintenance | Flush pump with clean water after use; inspect/replace O-rings |
| Spare Parts Available | Nozzles, seals, O-rings, pump assemblies |
| Repair Approach | User-serviceable filters, nozzles and hose connections |
Frequently Asked Questions - VV-SWC-21 Vevor
How do I connect the pressure washer to a water supply?
Attach a standard garden hose (3/4 inch) to the water inlet. Ensure the water supply is turned on and the hose is free of leaks before starting the machine.
What types of nozzles can I use and when?
Use the 0° nozzle for high-pressure spot cleaning, 25° for general rinsing, 40° for wider milder cleaning, and the soap nozzle for applying detergent. Always test on a small area first.
How do I properly start the pressure washer?
Connect all hoses, turn on the water, plug into a grounded outlet, and unlock the trigger. Squeeze the trigger to release trapped air, then press the power switch. Never run the pump without water.
Why is the pressure washer not building enough pressure?
Check for kinks in the hose, water supply restrictions, a clogged nozzle, or air in the system. Turn off the unit, ensure the inlet filter is clean, and purge air by squeezing the trigger.
Can I use hot water with this pressure washer?
No, this unit is designed for cold water only. Using hot water can damage the pump and seals, voiding the warranty.
How do I clean the detergent tank and injector?
After each use, run a few liters of fresh water through the detergent suction tube. For thorough cleaning, disassemble the tank and rinse with mild soap, avoiding harsh chemicals.
What maintenance is required after each use?
Turn off the machine, disconnect the water supply, and squeeze the trigger to release residual pressure. Disconnect the hose and store the unit in a frost-free area. Flush the pump with clean water periodically.
How do I replace the O-rings or seals?
Turn off and unplug the unit. Depressurize and drain all water. Use a screwdriver to carefully remove the old O-rings from fittings. Apply silicone grease on new O-rings and install them in place.
Is it safe to use an extension cord?
Yes, but the cord must be rated for outdoor use and at least 14 gauge. Keep the connection dry and away from puddles. Avoid overloading the circuit.
Why does the motor start and stop intermittently?
Interruptions often occur due to an unsteady water supply, a clogged inlet filter, or the thermal overload tripping. Check the water source, clean the filter, and allow the motor to cool if it has overheated.
User questions about VV-SWC-21 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual VV-SWC-21 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VV-SWC-21 by Vevor.
USER MANUAL VV-SWC-21 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : VV-SWC-21
Category : Pressure washer