BS-85 - Saw Vevor - Free user manual and instructions
Find the device manual for free BS-85 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bench Band Saw |
| Brand | Vevor |
| Model Number | BS-85 |
| Motor Power | 350 W |
| Power Supply | 230 V ~ 50 Hz |
| Idle Speed | 850 m/min |
| Cutting Height Max | 85 mm |
| Throat Depth | 150 mm |
| Blade Length | 1500 mm |
| Blade Width Range | 3 – 10 mm |
| Table Dimensions | 300 × 300 mm |
| Table Tilt Range | 0° – 45° |
| Dust Port Diameter | 32 mm |
| Overall Dimensions (L × W × H) | 500 × 480 × 780 mm |
| Net Weight | 28 kg |
| Safety Features | Protective blade guard, emergency stop switch |
| Maintenance | Clean dust and lubricate moving parts regularly |
| Replacement Parts | Blades, drive belts, bearings |
Frequently Asked Questions - BS-85 Vevor
What is the maximum cutting height of the Vevor BS-85 band saw?
The maximum cutting height of the BS-85 is 85 mm. The throat depth is 150 mm, allowing you to cut wide workpieces within a compact bench band saw footprint.
How do I change the band saw blade?
To change the blade: 1) Disconnect the saw from power. 2) Release blade tension by turning the tension knob (often in a counter-clockwise direction). 3) Remove the upper and lower blade guards. 4) Slip the blade off both bandsaw wheels. 5) Mount the new blade with teeth facing downward toward the table, then center it on the wheels. 6) Retension and replace guards. Always follow the user manual for specific torque settings.
How should I tension the blade?
Blade tension is adjusted with the dedicated tension knob until the blade has a proper deflection of about 1/8 to 1/4 inch under light side pressure. Avoid over-tensioning, which can break the blade, and ensure the blade springs back to its original line when pressed.
What safety precautions should I take when using the BS-85?
Always wear safety glasses and hearing protection. Keep hands a safe distance from the blade and use a push stick for thin or small parts. Ensure the blade guard is in place, the blade is properly tensioned, and the machine is unplugged before any maintenance or adjustment.
How can I adjust the blade tracking?
Blade tracking is set by turning the rear tracking knob on the upper wheel while slowly rotating the blade by hand. Adjust until the blade remains centered on the rubber tires and the blade teeth clear the wheel flanges slightly. Retighten after adjustment.
What maintenance is required for the BS-85?
Regularly clean sawdust from the table, tires, and the dust port. Lubricate moving parts (wheel shafts, tension mechanism) with a light machine oil. Inspect the blade for wear and the rubber tires for cracks. Replace worn parts promptly to keep the saw running smoothly.
Can the BS-85 cut various materials?
Yes, the BS-85 can cut wood, soft metals (aluminum, brass), and plastics by selecting the appropriate blade tooth pitch and speed. For ferrous metals, reduce speed or use a specific blade. Always use a cutting fluid for metal and follow the blade manufacturer's recommendations.
What are the power requirements for the BS-85?
The BS-85 runs on a standard 230 V–240 V, 50 Hz single-phase supply and has a 350 W motor. This is sufficient for light to medium workshop tasks. Ensure the outlet matches and use a residual current device if extension cables are required.
How do I replace the drive belt?
To replace the drive belt: 1) Unplug the saw. 2) Open the lower wheel housing. 3) Loosen the motor bracket bolts and flip the motor to reduce belt tension. 4) Remove the old belt, install the new one, then retension the motor. 5) Close the housing and test the saw. Refer to the manual for the belt type and tension specification.
What is the blade speed and suitable blade size?
The idle blade speed is 850 m/min. The recommended blade length is 1500 mm with widths between 3 and 10 mm. Selecting a combination of length and tooth pitch ensures efficient cutting and helps prevent premature blade wear.
User questions about BS-85 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual BS-85 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BS-85 by Vevor.
USER MANUAL BS-85 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : BS-85
Category : Saw