XFH-SS04 - Charger Vevor - Free user manual and instructions
Find the device manual for free XFH-SS04 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Smart battery charger |
| Brand | Vevor |
| Model | XFH-SS04 |
| Input voltage | 110-240 V AC, 50/60 Hz |
| Output voltage | 12 V / 24 V (automatic selection) |
| Charging current | 4 A (maximum) |
| Compatible battery types | Lead-acid, AGM, GEL, EFB |
| Display | LCD screen with cycle and voltage indicators |
| Main functions | Fast charging, maintenance charging, winter mode, desulfation |
| Built-in protections | Polarity reversal, short circuit, overheating, overcharge |
| Dimensions (L x W x H) | 17.5 x 12 x 6 cm |
| Weight | 0.75 kg |
| Cable length | 1.2 m |
| Power supply | Mains via power cable |
| Maintenance and cleaning | Clean with a soft, dry cloth, unplug before any maintenance |
| Safety | Place in a ventilated area, avoid moisture and water splashes |
| Spare parts | Cables and charging clamps available |
| Repairability | Designed with standard components, repair possible by a professional |
| Warranty | 2 years |
| General information | Downloadable PDF manual in French, 192 pages |
Frequently Asked Questions - XFH-SS04 Vevor
What types of batteries can I charge with the Vevor XFH-SS04?
The XFH-SS04 charger supports 12 V or 24 V lead-acid, AGM, GEL, and EFB batteries. Make sure to respect the battery capacity (usually between 4 Ah and 120 Ah).
How do I know if my XFH-SS04 charger is properly connected?
Turn on the charger and check the LCD screen: it should display the battery voltage and the charging mode. If the screen remains off, check the power cable and the wall outlet.
The charger indicates a polarity error, what should I do?
A polarity error occurs if the clamps are reversed. Immediately unplug the charger, then reconnect the red clamp to the positive terminal and the black clamp to the negative terminal. The built-in protection prevents any damage.
Can I leave the charger plugged in for a long period?
Yes, the maintenance mode automatically maintains the charge without overcharging the battery. It is ideal for vehicles stored during winter.
How long does it take to charge a car battery?
The charging time depends on the battery capacity and its condition. For a discharged 60 Ah battery, allow approximately 10 to 15 hours with a 4 A current.
What is winter mode on the XFH-SS04?
Winter mode increases the charging voltage to compensate for low temperatures, allowing efficient charging in cold weather. Activate it when the temperature is below 5°C.
What does the desulfation function mean?
Desulfation sends high-frequency pulses to dissolve lead sulfate accumulated on the battery plates. This function can extend the lifespan of sulfated batteries.
Is the charger waterproof?
No, the XFH-SS04 is not waterproof. It must be used away from moisture and water splashes. Use it in a dry and well-ventilated place.
Where can I download the free PDF manual?
You can download the PDF manual directly from the notice-facile.com page. The complete 192-page manual is available in French.
What should I do if the charger does not detect the battery?
Check that the clamps are in good contact with the battery terminals and that the battery is not completely damaged. Make sure the battery voltage is greater than 2 V to be detected.
User questions about XFH-SS04 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Charger in PDF format for free! Find your manual XFH-SS04 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XFH-SS04 by Vevor.
USER MANUAL XFH-SS04 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : XFH-SS04
Category : Charger