H26 - Charger Vevor - Free user manual and instructions
Find the device manual for free H26 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 12 V smart battery charger |
| Brand | Vevor |
| Model | H26 |
| Input voltage | 220-240 V AC, 50/60 Hz |
| Output voltage | 12 V DC |
| Charging current | 6 A |
| Compatible battery types | Lead-acid, AGM, GEL, VRLA |
| Recommended battery capacity | 2 to 100 Ah |
| Charging cycle | Intelligent multi-stage charging with maintenance and desulfation |
| Display | LCD with charge and voltage indicators |
| Protection | Reverse polarity protection, short-circuit protection, overheat protection |
| Dimensions (L x W x H) | Approximately 18 x 12 x 6 cm |
| Weight | Approximately 0.8 kg |
| Cable length | 2 x 1.5 m |
| Cooling | Natural convection cooling |
| Maintenance and cleaning | Unplug the device and clean the exterior with a soft, dry cloth |
| Safety | Do not expose to moisture; use in a ventilated area |
| Spare parts and repairability | Some spare parts are available; any repair must be carried out by a professional |
| General information | User manual and operating instructions in French are available |
Frequently Asked Questions - H26 Vevor
How do I connect the Vevor H26 charger to my battery?
First connect the red clip to the positive terminal (+), then the black clip to the negative terminal (-). Make sure the charger is unplugged before connecting the clips. Follow this order to avoid any short circuit.
Is this charger compatible with an AGM or GEL battery?
Yes, the Vevor H26 supports lead-acid, AGM, and GEL batteries. It automatically adjusts its charging curve for each technology.
Can I leave the charger connected in maintenance mode?
Yes, the charge maintenance mode is designed to be left connected to the battery without supervision. It prevents overcharging and extends battery life.
What should I do if the error indicator lights up?
First check that the clips are correctly connected to the right terminals. The indicator may indicate a reverse polarity or a short circuit. Unplug immediately and check the connections.
What is the required input voltage?
The device operates on a 220-240 V AC mains supply, with a frequency of 50/60 Hz. It is therefore suitable for standard domestic use in France.
Can this charger recharge a 100 Ah car battery?
Yes, for a 100 Ah battery, the 6 A charging current is suitable. The charging time will be approximately 14 to 16 hours depending on the battery condition.
How do I maintain the charger?
Always unplug the charger before cleaning. Use a soft, dry cloth for the exterior. Never use water or solvent-based products.
Does the charger have protection against incorrect connections?
Yes, the Vevor H26 is equipped with protection against reverse polarity, short circuits, and overheating. It automatically shuts down in the event of an anomaly.
Can I recharge a motorcycle battery with this charger?
Absolutely, the charger is suitable for 2 to 100 Ah batteries, including motorcycle and scooter batteries. The 6 A current is compatible.
What should I do if the charger does not start?
Check the mains outlet, the condition of the cable, and the connection of the clips. If the problem persists, consult the user manual or call a professional.
User questions about H26 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Charger in PDF format for free! Find your manual H26 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H26 by Vevor.
USER MANUAL H26 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : H26
Category : Charger