2500BP - Pressure washer Vevor - Free user manual and instructions
Find the device manual for free 2500BP Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric pressure washer |
| Brand | Vevor |
| Model | 2500BP |
| Maximum pressure | 2500 PSI (172 bar) |
| Water flow rate | Approximately 8.5 L/min (2.2 GPM) |
| Power supply | 230 V / 50 Hz |
| Motor power | 1800 W |
| High-pressure hose length | 8 meters |
| Power cord length | 5 meters |
| Dimensions (L x W x H) | 35 x 30 x 55 cm |
| Weight | 12 kg |
| Noise level | Approximately 75 dB(A) |
| Main functions | High-pressure cleaning, multiple nozzles (0°, 15°, 40° and foam) |
| Additional features | Automatic shut-off (Total Stop), built-in detergent tank |
| Maintenance and cleaning | Clean the water filter, purge the pump after use, store in a frost-free place |
| Safety | Trigger lock, safety valve, motor thermal protection |
| Spare parts and repairability | Nozzles and seals available, replaceable pump |
| Warranty | 2 years |
| Package contents | Washer, gun, lance, high-pressure hose, nozzles, user manual |
| Provided documents | User manual in French |
Frequently Asked Questions - 2500BP Vevor
How to start the Vevor 2500BP pressure washer?
Make sure the water supply is connected and turned on, plug the appliance into a 230 V socket, then press the on/off switch. Unlock the gun trigger and start cleaning. Never run the appliance without water.
What is the maximum pressure of the Vevor 2500BP?
The Vevor 2500BP model delivers a maximum pressure of 2500 PSI (172 bar), ideal for cleaning driveways, patios, vehicles and facades.
What accessories are included with the 2500BP washer?
The package includes the washer, a gun with trigger, a lance, an 8 m high-pressure hose, several nozzles (0°, 15°, 40°), a foam nozzle, and the user manual.
How to use the foam nozzle for detergent?
Attach the foam nozzle to the lance, then fill the built-in detergent tank with a suitable product. The foam is applied at low pressure, leave it to act for a few minutes, then rinse with a high-pressure nozzle.
What to do if the pressure is low?
First check that the water supply is fully open and that the hose is not kinked. Clean the water filter located at the pump inlet. Make sure the nozzle is not clogged, and bleed the air by pressing the trigger until you get a steady stream.
How to purge the pump after use?
Unplug the appliance, turn off the water supply, then press the trigger to release the remaining pressure in the circuit. If you store the appliance, drain the water from the pump by tilting the appliance slightly or using an air blower.
Can I use hot water with the Vevor 2500BP?
No, this model is designed for cold water only. Using hot water can damage the pump and void the warranty.
How to maintain the pressure washer?
After each use, purge the circuit, clean the water inlet filter, and wipe down the appliance. In winter, completely drain the water and store the appliance in a frost-free place. Regularly check the condition of the seals and nozzles.
What safety precautions should I follow?
Never point the jet at people or animals. Wear protective goggles. Do not touch the plug with wet hands. Use the trigger lock during breaks. Do not leave the appliance unattended while it is running.
Where to find spare parts for the 2500BP?
You can find nozzles, seals, hoses and pump parts on the Vevor website or from authorized dealers. Refer to the manual for exact references and the replacement procedure.
User questions about 2500BP Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual 2500BP - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2500BP by Vevor.