ULX-DRY 02A - Uncategorized Ulsonix - Free user manual and instructions
Find the device manual for free ULX-DRY 02A Ulsonix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Automatic infrared sensor hand dryer |
| Brand | Ulsonix |
| Model | ULX-DRY 02A |
| Dimensions (W x H x D) | 245 x 360 x 200 mm |
| Weight | 3.2 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Nominal power | 1800 W |
| Airflow rate | 90 m/s |
| Drying time | 12 seconds |
| Noise level | 75 dB(A) |
| Housing material | Stainless steel and ABS |
| Sensor type | Automatic infrared |
| Triggering | Contactless |
| Protection class | IP23 |
| Installation | Wall-mounted |
| Air filter | Washable filter |
| Maintenance | Regular cleaning of the exterior and the filter |
| Safety | Overheating protection |
| Repairability | Spare parts available (motor, sensor, filter) |
Frequently Asked Questions - ULX-DRY 02A Ulsonix
How to install the ULX-DRY 02A hand dryer?
The hand dryer must be attached to the wall using the screws provided. Consult the manual for the drilling dimensions. Make sure the device is level and at a suitable height for adult use. Installation must be carried out without power.
How to clean the ULX-DRY 02A?
Unplug it and clean the exterior with a soft, damp cloth. Remove the air filter and wash it with clean water. Do not use abrasive products.
Why does the hand dryer not start?
Check that the device is properly powered. The infrared sensor may be obstructed by dust. Clean the sensor window and the filter. If the problem persists, the motor or the sensor must be replaced.
What is the noise level of the ULX-DRY 02A?
The noise level is approximately 75 dB(A), which is common for a high-speed hand dryer.
Is the ULX-DRY 02A hand dryer economical?
With a power of 1800 W, it offers rapid drying in about 12 seconds, reducing electricity consumption compared to conventional models.
Can the sensor sensitivity be adjusted?
Yes, some models have an adjustment potentiometer. Refer to the manual to adjust the detection distance (often from 5 to 15 cm).
What maintenance does the filter require?
The air filter must be cleaned regularly, at least once a month. It is washable and reusable.
Does the hand dryer casing resist splashes?
Yes, thanks to its IP23 protection class, it resists water splashes and dust.
Where to buy spare parts for the ULX-DRY 02A?
You can find parts such as the motor, sensor, or filter from the Ulsonix after-sales service or authorized dealers. Always use original parts.
How to know if the motor is defective?
If the hand dryer does not blow air while the fan is not turning, it is likely that the motor is burned out. In that case, cut off the power and contact a professional for the replacement.
User questions about ULX-DRY 02A Ulsonix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ULX-DRY 02A - Ulsonix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ULX-DRY 02A by Ulsonix.