HP2FE10CS90SUK - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HP2FE10CS90SUK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hotpoint |
| Model | HP2FE10CS90SUK |
| Product type | Freestanding slimline dishwasher |
| Place setting capacity | 10 place settings |
| Width | 45 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 38 kg |
| Energy rating | E (EU energy label) |
| Water consumption per cycle | 9.5 litres |
| Noise level | 49 dB(A) |
| Number of programs | 6 |
| Programs | Eco, Intensive, Normal, Quick 30, Glass, Soak |
| Half load option | Yes |
| Delay start | Yes, up to 24 hours |
| Display type | LED indicator panel |
| Adjustable upper basket | Yes |
| Salt and rinse aid indicator | Yes |
| Overflow protection | Yes |
| Child lock | Yes |
| Repairability index | 8.0 out of 10 |
| Spare parts availability | 10 years |
| Warranty | 1 year parts and labour |
Frequently Asked Questions - HP2FE10CS90SUK HOTPOINT
How do I install the HP2FE10CS90SUK dishwasher?
Place the dishwasher on a flat, stable surface. Connect the water inlet hose to a cold water supply (3/4 inch thread) and the drain hose to a suitable waste pipe or sink drain. Plug the appliance into an earthed wall socket. Level the dishwasher by adjusting the front feet and ensure it does not rock. Run a rinse cycle before first use.
What are the available wash programs and when should I use them?
The HP2FE10CS90SUK offers 6 programs: Eco for normal loads at low temperature, Intensive for heavily soiled pots and pans, Normal for everyday dishes, Quick 30 for lightly soiled loads in 30 minutes, Glass for delicate glassware, and Soak to pre-rinse dishes. Refer to the user manual for detailed guidance.
How do I clean and maintain the dishwasher to prevent odours?
Clean the filter at the bottom of the tub weekly by rinsing it under running water. Wipe the door gasket and remove any food debris. Run a maintenance cycle once a month using a dishwasher cleaner or a cup of white vinegar on an empty machine at a high temperature. This removes grease, limescale, and prevents unpleasant smells.
Why is my dishwasher not draining water?
First, check if the drain hose is kinked or blocked. Inspect the filter assembly for large food particles and clean it. Also verify that the sink drain (if connected to the sink) is not clogged. If the issue persists, the drain pump impeller may be obstructed; remove the pump cover and clear any debris. Always switch off the power before inspecting the pump.
What is the maximum number of place settings and how should I load them?
This model has a capacity of 10 place settings. Place plates in the lower basket, cups and glasses on the top shelf, cutlery in the cutlery basket. Ensure that items do not block the spray arms. Tilt cups and bowls downwards so water can flow off. Load pots and pans at the sides of the lower basket for best cleaning.
What does the flashing salt indicator mean?
The flashing salt indicator warns you that the regeneration salt is low. Open the salt container next to the filter, fill it with dishwasher salt (max 1.5 kg), and run a rinse cycle to remove any excess. Only use special dishwasher salt, not table salt.
Can I use all-in-one dishwasher tablets?
Yes, the HP2FE10CS90SUK is compatible with all-in-one tablets (e.g., 3-in-1, 4-in-1). Place the tablet in the detergent dispenser and close it. For short or Eco programs, some tablets may not dissolve completely; in that case, use powder or gel, or place the tablet in the cutlery basket.
How do I adjust the upper basket height?
The upper basket has an adjustable height mechanism. Pull the basket out fully, lift the two side levers, and slide the basket to the desired position (upper or lower). This allows you to create more space for tall items in either basket. Always load the basket when it is in the selected position.
What is the Eco program and how does it save resources?
The Eco program is the most energy-efficient cycle. It operates at a lower temperature (about 50°C) for a longer duration, reducing electricity and water consumption. It is suitable for normally soiled dishes. This cycle is recommended for achieving optimal results while minimizing environmental impact.
How do I reset the dishwasher to factory settings?
To reset the HP2FE10CS90SUK, press and hold the Reset button (or similar, depending on your panel) for 3 seconds. Alternatively, switch off the dishwasher at the wall socket, wait 10 minutes, and switch it back on. This cancels the active cycle and restores default settings without erasing any saved options.
User questions about HP2FE10CS90SUK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HP2FE10CS90SUK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HP2FE10CS90SUK by HOTPOINT.
USER MANUAL HP2FE10CS90SUK HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : HP2FE10CS90SUK
Category : Dishwasher