HIC 3C26 W UK N - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HIC 3C26 W UK N HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hotpoint |
| Model | HIC 3C26 W UK N |
| Product Type | Freestanding Slimline Dishwasher |
| Place Settings | 10 |
| Width | 45 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 36 kg |
| Noise Level | 49 dB (A) |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 238 kWh |
| Annual Water Consumption | 2665 litres |
| Water Consumption per Cycle | 9.5 litres |
| Number of Programs | 6 |
| Programs | Eco 50°C, Intensive 70°C, Daily 60°C, Quick 30' 50°C, Glass 40°C, Rinse |
| Delay Timer | Yes, 24h |
| Digital Display | Yes |
| Interior | Stainless steel |
| Safety Features | Child lock, Aquastop overflow protection |
| Self-Cleaning Filter | Yes |
| Half Load Option | Yes |
| Adjustable Racks | Yes |
| Cutlery Basket | Yes |
| Spare Parts Availability | 10 years |
| Installation Type | Freestanding |
Frequently Asked Questions - HIC 3C26 W UK N HOTPOINT
How do I install my Hotpoint dishwasher?
Ensure the dishwasher is on a stable surface and connected to the water supply and drain pipes. Check that the inlet hose is not kinked. Level the appliance by adjusting the feet before first use.
Why does my dishwasher not drain?
If water remains at the bottom, the drain filter may be blocked or the drain hose is kinked. Clean the filter and straighten the hose. Also check the drain pump for obstructions.
Why are my dishes still dirty after a cycle?
Poor cleaning often results from overloading, improper loading, or a clogged filter. Make sure the spray arms can rotate freely and use the appropriate detergent.
How do I clean the dishwasher filter?
Remove the lower rack and locate the filter assembly at the bottom. Twist it counter-clockwise and lift it out. Rinse under running water and brush away debris. Replace and turn clockwise until it locks.
What does error code E1 mean?
Error E1 indicates a drainage problem. Turn off the appliance and disconnect power. Inspect the drain hose for blockages and clean the filter. If the issue persists, contact After-Sales Service.
Should I pre-rinse dishes before loading?
No, scraping off large food particles is enough. Modern dishwashers with sensor technology detect soil levels and adjust the cycle. Pre-rinsing wastes water and energy.
Which detergent should I use?
Use a dedicated dishwasher detergent in the form of tabs, powder, or gel. Add rinse aid for better drying and salt for water softening in areas with hard water.
How do I reset my Hotpoint dishwasher?
To reset, unplug the appliance for 30 seconds and plug it back in. Alternatively, press the Reset or Cancel button for 3 seconds to clear the current program.
How do I prevent limescale build-up?
Use dishwasher salt regularly and set the water hardness level according to your region. Run a descaling cycle with citric acid or a commercial descaler every few months.
Is my dishwasher repairable?
Yes, Hotpoint provides spare parts for up to 10 years after purchase. You can order genuine parts through the official website or contact service centers for repairs.
User questions about HIC 3C26 W UK N HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HIC 3C26 W UK N - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HIC 3C26 W UK N by HOTPOINT.
USER MANUAL HIC 3C26 W UK N HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : HIC 3C26 W UK N
Category : Dishwasher