KH 2287 RADIO ALARM CLOCK - Radio alarm clock EBENCH - Free user manual and instructions

Product Type	Radio Alarm Clock
Brand	EBENCH
Model	KH 2287
Power Supply	220/230 V ~ 50 Hz, with 9 V backup battery (not included)
Display	LED
Radio Reception	FM and AM (MW)
FM Antenna	Unfurlable floating antenna
AM Antenna	Built-in ferrite antenna
Alarm Function	Audible alarm (buzzer) or radio, with 9-minute snooze
Alarm Duration	Maximum 1 hour 59 minutes
Sleep Function	Timer from 0:00 to 1:59 hours to fall asleep to music
Time Setting	TIME SET button + Hour and Minute buttons
Alarm Setting	ALARM buttons + Hour and Minute
Function Switch	BUZZER (ALARM) / AUTO / ON / OFF
Backup System	9 V battery to keep time during power outage
Care and Cleaning	Clean with a dry cloth, disconnect before
Safety	Do not expose to water or heaters, do not open the case, unplug if damaged
Certifications	Complies with EU directives (low voltage and electromagnetic compatibility)

Frequently Asked Questions - KH 2287 RADIO ALARM CLOCK EBENCH

How to set the time on the KH 2287 radio alarm clock?

Hold down the TIME SET (or HOUR) button and simultaneously press the HOUR and MINUTE buttons until the current time is displayed.

How to set the alarm to wake up to the radio?

First set the alarm time with the ALARM, HOUR and MINUTE buttons. Set the function switch to ON, select a radio station and adjust the volume. Then set the switch to AUTO.

How to temporarily stop the alarm?

Press the snooze button. The alarm automatically resumes after approximately 9 minutes.

Does the sleep function allow listening to the radio while falling asleep?

Yes, press the sleep button. The radio turns off after the set duration (from 0:00 to 1:59 hours). To set the duration, hold down the sleep button and press MINUTE (decrease) or HOUR (increase).

What to do in case of a power outage?

Insert a 9 V battery in the compartment. In case of outage, the time and settings are preserved, but the LED display and radio do not work on battery. When power returns, the time reappears automatically.

How to improve FM reception?

Extend the floating antenna and orient it for better reception.

How to switch between FM and AM?

Use the band selector switch (FM/AM) on the side of the device.

How to clean the radio alarm clock?

Unplug the device and clean it with a dry cloth. Never use harsh cleaning products.

Which battery to use for backup?

A 9 V battery (type 6LR61) is recommended. Replace it once a year.

How to permanently disable an alarm?

Set the function switch to OFF. To cancel the setting, set the alarm time to the current time or set the switch to OFF.

USER MANUAL KH 2287 RADIO ALARM CLOCK EBENCH

Operating instructions

① Function switch (BUZZ (ALARM)/AUTO/ON/OFF)
② LED display
③ Snooze button
④ Sleep button
⑤ Alarm
⑥ Alarm off button
⑦ Hours
8 Minutes
⑨ Time setting button (TIME SET)
Volume control
Tuner
12 Band selector MW/VHF (AM/FM)
③ Battery compartment (in event of mains power failure)

Controls

• Operate the device at the correct mains voltage only (220/230 Volt 50 Hz).
• Exposing this type of electrical equipment to high temperatures or moisture could lead to fires or electric shock.

To prolong the service life of your radio do not position it near water or heating radiators. Always find a place with good air circulation.

• Never use damaged electrical equipment (the device itself or its mains lead).
• Do not try to reach the appliance if it falls into water. Pull out the plug from the mains socket immediately.
  The electrical components in this device are at high voltage. Never remove any parts of the housing.
  If repairs are required please take or send the device to our customer services centre (See the guarantee card for the address and telephone number).
• When required, the housing can be cleaned with a soft cleaning cloth (after ensuring that the plug is out of the mains

Safety advice

socket). Never use cleaning agents as they could damage the housing.

Connecting to mains	Insert the plug into a mains socket (make sure the mains voltage matches that of the device).
Radio reception	Switch on the radio by moving the function switch ⑨ into the ON position. Set the band selector switch to the required position (VHF or MW) ⑫. Set the volume using the volume control ⑬. Set the radio to the VHF or medium wave frequency of your choice using the tuner ⑭.
Aerials	FM (VHF): Unwind and position the wire aerial for best reception of VHF. AM /MW: The radio has a sensitive ferrite aerial.
Setting the time	Press and hold down the TIME button ⑨ (TIME / TIME-SET) whilst pressing the HOURS ⑦ or MINUTES ⑧ button until you see the correct time in the display.
Setting the alarm time	Press the ALARM ⑤ and HOURS ⑦ or MINUTES ⑧ button until the required alarm time appears in the display.
Setting the alarm mode	1 First set the required alarm time as explained above. 2 If you wish to be woken by the buzzer set the FUNCTION SWITCH ① to BUZZ (ALARM). The activated alarm mode is then shown in the display. If you wish to be woken by the radio, set the FUNCTION

SWITCH to ON and select the desired station/frequency and the volume ⑩.

3 Then set the FUNCTION SWITCH ① to AUTO. The activated alarm mode is then shown in the display.
4 Then set the FUNCTION SWITCH ① to RADIO. The activated alarm mode is then shown in the display.

The appropriate alarm sounds when the alarm time is reached. The alarm sound switches off automatically after 1 hour 59 minutes. The alarm sound can be temporarily interrupted by pressing the SNOOZE button ③ . After approximately 9 minutes the alarm sound automatically switches itself on again. This process can be repeated for a maximum of 1 hour 59 minutes. You can cut short the alarm period by setting the FUNCTION SWITCH ① to OFF.

After the alarm is switched off, if you set the FUNCTION SWITCH ① to AUTO again the alarm will sound on the next day at the same time.

This setting allows you to go to sleep whilst listening to the radio. With the FUNCTION SWITCH ① in the AUTO or OFF position the radio plays for a maximum of 1 hour 59 minutes.

1 Press the Sleep button ④ to set the time for which the radio will play. The display shows 0:59 .
2 If you wish the radio to stop playing earlier just press and hold down the Sleep button ④ whilst pressing the MINUTES ⑧ button until the desired playing time is displayed.

Automatic 24 hour alarm

Going to sleep with the sleep function

3 If you wish the playing time to be extended to 1:59, press and hold down the Sleep button ④ whilst pressing the HOURS ⑦ button.
4 To switch off the Sleep function ① or to set the sleep time to 0:00 press the SNOOZE button ③.

NOTE: Pressing the Sleep button ① again after setting the sleep time will automatically reset the sleep time to 0:59 . Press the SNOOZE ③ button to switch off the Sleep function.

Mains power failure

To guard against losing your settings in the event of a mains power failure insert a 9-volt battery into the battery compartment. The battery ensures that the radio alarm clock will function in emergency mode even during a mains power failure. In these circumstances the LED display ② will not be illuminated. Once mains power is restored the correct time will be automatically displayed again. Note: The alarm, radio and LED ② display do not function during battery operation.

• Insert the battery into the battery compartment (see Fig. ③).
• Replace the battery annually.

We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Statement of Bochum, Germany, hereby declare that this product conforms conformity with the following EC regulations:

EC low voltage regulations, Electromagnetic compatibility, Applicable harmonised standards.

Type/Description:

Radio alarm clock KH 2284, KH 2285, KH 2286, KH 2287

Bochum, 31.05.2003

Hans Kompernaß

• Managing Director -

Mode d'emploi