DCG432X - Uncategorized DEWALT - Free user manual and instructions
Find the device manual for free DCG432X DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | DEWALT |
| Model | DCG432X |
| Product type | Cordless angle grinder |
| Voltage | 18 V XR |
| Power source | Li-Ion battery |
| No-load speed | 8,000 rpm |
| Disc diameter | 125 mm |
| Spindle thread | M14 |
| Disc brake | Yes |
| Soft start | Yes |
| Protective cover | Yes |
| Auxiliary handle | Yes |
| Net weight | 2.3 kg (without battery) |
| Sound pressure level | 82 dB(A) |
| Sound power level | 93 dB(A) |
| Vibrations | 8.6 m/s² |
| Dimensions (L x W x H) | 321 x 120 x 130 mm |
| Maintenance | Remove dust from the vents with compressed air |
| Cleaning | Slightly damp soft cloth |
| Safety | Mandatory protective equipment |
| Included accessories | Guard, handle, disc wrench |
| Warranty | 3 years |
| Country of manufacture | China |
Frequently Asked Questions - DCG432X DEWALT
Which battery should I use with the DCG432X?
This grinder uses DEWALT XR 18V Li-Ion batteries from the 18V series. Batteries with a capacity of 2.0 Ah to 5.0 Ah are compatible.
How do I change the disc on the grinder?
Disconnect the battery, press the spindle lock button, loosen the nut with the wrench, replace the disc, then tighten the nut. Make sure the disc is correctly centered.
Does the disc brake work after stopping?
Yes, the disc brake ensures a rapid stop of the disc. This safety feature reduces the residual rotation time after each use.
Can I use this grinder to cut metal?
Yes, with a suitable cutting disc of 125 mm diameter, it can cut steel and other metals. Follow the safety instructions and use the protective guard.
What should I do if the grinder does not start?
Check that the battery is charged, inserted correctly, that the guard is properly positioned and that the spindle lock is not engaged. If the problem persists, contact a DEWALT service center.
How do I clean the grinder?
Use a slightly damp cloth for the exterior and compressed air for the ventilation openings. Never use solvents or abrasive products.
Is it suitable for sanding work?
Yes, by attaching a sanding pad with a suitable abrasive disc. Variable speed is not available, but the fixed speed of 8000 rpm is suitable for most tasks.
Which accessories are compatible?
Grinding and cutting discs of 125 mm with a 22.2 mm bore and M14 thread. DEWALT accessories are recommended for optimal performance.
Why does the grinder stop during use?
The electronic protection cuts off the power in case of overload, disc blockage, or low battery. Let the tool cool down and recharge the battery if necessary.
How should I store the battery when not in use?
Remove the battery from the tool and store it in a dry place at room temperature. Avoid storing it completely discharged; a partial charge of 60% is ideal.
User questions about DCG432X DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DCG432X - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCG432X by DEWALT.
USER MANUAL DCG432X DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DCG432X
Category : Uncategorized