EFV726K - Range hood ELECTROLUX - Free user manual and instructions

Find the device manual for free EFV726K ELECTROLUX in PDF.

ELECTROLUX EFV726K - Range hood
📄 460 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ELECTROLUX EFV726K - page 88
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Extractor hood
Brand Electrolux
Model EFV726K
Width 70 cm
Height 45 cm
Depth 50 cm
Net weight 11.5 kg
Power supply 220-240 V / 50 Hz
Motor power 220 W
Max airflow (extraction) 680 m³/h
Max airflow (recirculation) 450 m³/h
Max noise level 65 dB
Number of speeds 3 speeds + intensive
Control Electronic buttons
Lighting 2 x 3 W LED
Grease filter Recyclable aluminium
Charcoal filter Optional (model 942 158 006)
Extraction mode External ducting (Ø 150 mm)
Recirculation mode Possible with charcoal kit
Installation type Wall-mounted, chimney
Material Brushed stainless steel
Extraction diameter 150 mm
Energy class B
Repairability Spare parts available on request
Maintenance Regular cleaning of grease filters

Frequently Asked Questions - EFV726K ELECTROLUX

How to install the Electrolux EFV726K extractor hood?
The installation of the hood is generally done by following the steps in the manual. The hood must be firmly attached to a vertical wall, at a height of at least 65 cm above an electric cooker and 75 cm above a gas cooker. Provide an extraction duct with a diameter of 150 mm for extraction mode or install the recirculation kit if necessary. It is recommended to call a professional for any electrical connection.
How to clean the grease filters of the hood?
The aluminium grease filters should be removed regularly and cleaned. Wash them by hand with hot water and detergent, or in the dishwasher at a low temperature. Dry them completely before reinstalling. Cleaning every 2 to 3 months is recommended to maintain suction efficiency.
How to replace the activated charcoal filter?
If the hood operates in recirculation mode, the charcoal filter must be replaced every 3 to 6 months depending on usage. To replace it, unclip the grease filters, remove the used charcoal filter, position the new one (model 942 158 006) and reinstall the grease filters. Consult the manual for detailed instructions.
Why is my EFV726K hood noisy?
A high noise level may be due to incorrect installation, clogged filters, or an extraction duct that is too long or bent. Check that the filters are clean and that the duct is properly connected. If the noise persists, the motor may need servicing. Consult the manual for the normal noise level (max 65 dB).
How to activate the intensive function?
The intensive function temporarily increases the suction power. Press the dedicated button (often marked with a turbo symbol) for about 2 seconds. The hood then operates at full power for a few minutes and automatically returns to the previous speed. Refer to the user guide for the exact button combinations.
How to change the LED bulb of the hood?
The LEDs of the EFV726K hood are not individually replaceable by the user. If the lighting fails, contact after-sales service or an approved technician. In some cases, a complete LED module must be replaced by a professional.
Is the hood compatible with recirculation mode?
Yes, the EFV726K hood can be used in recirculation mode. To do this, you must install an optional activated charcoal kit. This kit is available from approved Electrolux retailers. Recirculation mode is suitable for kitchens without access to the outside.
What is the diameter of the extraction duct?
The diameter of the extraction duct for the EFV726K hood is 150 mm. Use rigid or semi-rigid ducts of this size to ensure optimal airflow and reduce noise.
How to adjust the suction speed?
The hood has 3 speeds and an intensive function. Use the electronic buttons to select the desired speed. Speed 1 is suitable for gentle cooking, speed 2 for normal cooking, and speed 3 for frying or strong odours. The intensive function is ideal for a burst of steam.
What are the essential safety instructions?
Follow the instructions in the manual: the hood must be installed at the recommended height, the extracted air must not be vented into a flue, and never flambé under the hood. Disconnect the appliance before any cleaning or maintenance operation. Ensure that the electrical circuit is grounded.

User questions about EFV726K ELECTROLUX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual EFV726K - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EFV726K by ELECTROLUX.

USER MANUAL EFV726K ELECTROLUX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ELECTROLUX

Model : EFV726K

Category : Range hood