TP-RO 1400 E - Milling machine EINHELL - Free user manual and instructions
Find the device manual for free TP-RO 1400 E EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Router (plunge router) |
| Brand | EINHELL |
| Model | TP-RO 1400 E |
| Power input | 1400 W |
| Input voltage | 230 V / 50 Hz |
| No-load speed | 11 000 - 28 000 rpm |
| Electronic speed control | Yes |
| Maximum routing depth | 55 mm |
| Collet | 6 and 8 mm |
| Compatible bits | 6 and 8 mm shank bits |
| Fine-adjustable depth stop | Yes |
| Dust extraction connection | Yes, with adapter |
| Color | Red and black |
| Weight | 4.5 kg (approx.) |
| Dimensions (L x W x H) | 280 x 190 x 250 mm (approx.) |
| Included accessories | Collet 6/8 mm, wrench, dust extraction adapter, parallel guide |
| Maintenance and cleaning | Regularly clean the ventilation slots and moving parts |
| Safety | Safety switch, protective cover |
| Spare parts and repairability | Available from after-sales service |
| Warranty | 2 years |
Frequently Asked Questions - TP-RO 1400 E EINHELL
How to change the bit on the TP-RO 1400 E?
To change the bit, first unplug the device. Use the wrench to lock the shaft, then loosen the collet nut. Insert the new bit into the collet, tighten the nut, and check that the bit is securely fixed.
How to set the routing depth?
The depth is set using the depth stop. Loosen the adjustment knob, position the bit at the desired level, then retighten. Use the fine adjustment for optimum precision.
How to use the speed control?
The speed control is located on the housing. Turn the dial to adjust the speed based on the material and the type of bit. Always start at a low speed for hard materials and increase gradually.
What type of bits can I use with this device?
This model accepts bits with 6 and 8 mm shanks. Use quality bits suitable for your application (plunge cutting, grooving, profiling) and check that they are in good condition.
How to maintain the router?
Clean the machine after each use by dusting it and wiping the surfaces. Regularly check the carbon brushes, ventilation slots, and moving parts. Do not use corrosive products.
What safety instructions should be followed?
Always wear protective goggles and a dust mask. Use the machine with the protective cover in place. Never remove safety devices and work in a well-ventilated area.
How to connect the dust extraction?
The dust extraction adapter attaches to the outlet provided for this purpose at the rear of the machine. Connect a compatible vacuum cleaner to it. This helps reduce dust and work more cleanly.
What to do in case of overheating?
If the machine overheats, stop it immediately and allow it to cool down. Check that the ventilation slots are not obstructed. If the problem persists, contact the after-sales service.
How to use the parallel guide?
Attach the parallel guide to the base of the router. Set the distance between the bit and the guide according to the desired width. Tighten firmly to ensure precise and straight routing.
Where to find spare parts and get the device repaired?
Spare parts are available from the EINHELL after-sales service. Visit the official website or contact an authorized dealer for any repairs. Always use original parts.
User questions about TP-RO 1400 E EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Milling machine in PDF format for free! Find your manual TP-RO 1400 E - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-RO 1400 E by EINHELL.
USER MANUAL TP-RO 1400 E EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TP-RO 1400 E
Category : Milling machine