DCS384 - Saw DEWALT - Free user manual and instructions
Find the device manual for free DCS384 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless circular saw |
| Brand | DEWALT |
| Model | DCS384 |
| Nominal voltage | 54 V (max) |
| Battery type | Lithium-ion (FlexVolt) |
| Blade diameter | 184 mm (7 1/4") |
| Blade arbor | 20 mm |
| No-load speed | 4,000 rpm |
| Cutting depth at 90° | 61 mm |
| Cutting depth at 45° | 43 mm |
| Bevel cutting capacity | 0° to 50° |
| Weight (without battery) | 3.7 kg |
| Dimensions (L × W × H) | 310 × 220 × 250 mm |
| Main functions | Straight and bevel cuts, illuminated cutting line, vacuum connection |
| Care and cleaning | Cleaning of ventilation slots and checking blade tightening |
| Safety | Spindle lock, variable speed, blade brake |
| Spare parts and repairability | Blades, batteries, chargers available as replacements |
| Warranty | 3 years (according to conditions) |
Frequently Asked Questions - DCS384 DEWALT
How to change the blade of the DCS384 saw?
To change the blade, disconnect the battery and use the spindle lock. Unscrew the central screw with the supplied hex key, remove the flange, replace the blade, then retighten and make sure the blade turns freely before use.
Which battery is compatible with the DCS384?
The DCS384 saw uses DEWALT FlexVolt 54 V batteries (also compatible with 18 V chargers). Models such as DCB546, DCB547, DCB549 are perfectly suitable.
How to adjust the cutting depth?
Loosen the depth lever located on the rear of the shoe, adjust the blade height so that it protrudes about 5 to 10 mm below the workpiece, then firmly tighten the lever.
How to make a bevel cut?
Tilt the shoe by unlocking the bevel button, set the desired angle (from 0° to 50°) using the graduated scale, then lock it. The cutting depth is automatically adjusted.
How to clean the saw after use?
Disconnect the battery, remove the blade, and clean the shoe, the housing, and the ventilation slots with a soft brush or dry cloth. Do not use water or harsh solvents to avoid damaging the components.
What safety precautions should be taken during use?
Always wear safety goggles, gloves, and a dust mask. Make sure the workpiece is securely fixed, keep your hands away from the cutting area, and use the protective guard to avoid accidental contact.
Why does the DCS384 saw not start?
First check that the battery is properly inserted and charged. If it still does not start, check whether the blade brake or the variable speed is blocked. Cleaning the connections may also resolve the issue.
How to connect a vacuum cleaner to the saw?
The saw is equipped with a connection for dust extraction. Attach the vacuum hose to the adapter on the housing, making sure it is firmly fitted. Use a vacuum cleaner with an anti-static system for optimal efficiency.
How to store the DCS384 saw?
Remove the battery, clean the saw, and place it in a dry place away from moisture. Keep the blade in a protective case and store the tool out of reach of children.
What speed should be chosen for cutting metal?
Use a blade suitable for metal and set a moderate speed, for example 2,500 to 3,000 rpm. Advance slowly and steadily to avoid overheating and extend the blade's lifespan.
User questions about DCS384 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual DCS384 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCS384 by DEWALT.
USER MANUAL DCS384 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DCS384
Category : Saw