DCS358 - Saw DEWALT - Free user manual and instructions
Find the device manual for free DCS358 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless circular saw |
| Brand | DEWALT |
| Model | DCS358 |
| Power source | 18 V lithium-ion battery (XR series) |
| Blade diameter | 165 mm |
| No-load speed | 5,000 rpm |
| Cutting depth at 90° | 55 mm |
| Cutting depth at 45° | 40 mm |
| Bevel capacity | Up to 50° |
| Weight | 3.2 kg (without battery) |
| Length | 320 mm |
| Height | 280 mm |
| Width | 200 mm |
| Noise level | 97 dB(A) |
| Motor | Brushless |
| Blade brake | Yes, with quick action |
| Lighting | Integrated LED for improved cutting visibility |
| Key features | Bevel cutting, depth guide, vacuum connection |
| Maintenance and cleaning | Clean the ventilation slots with a brush, wipe the housing with a dry cloth |
| Safety | Retractable blade guard, anti-restart switch |
| Spare parts | Blades, batteries, chargers, motor brushes, switches available through DEWALT after-sales service |
| Repairability | Modular design for easy component replacement |
Frequently Asked Questions - DCS358 DEWALT
What is the battery compatibility with the DCS358?
The DCS358 works with all DEWALT 18V XR batteries, as well as with batteries from the DCB180, DCB181, DCB182 range, etc.
How do I change the blade on my DCS358 circular saw?
Disconnect the battery, use the included wrench to loosen the center screw, open the blade guard, replace the blade respecting the indicated rotation direction, then tighten firmly.
What maximum cutting depth can I achieve with the DCS358?
With a 165 mm blade, the maximum cutting depth is 55 mm at 90° and 40 mm at 45°.
How do I adjust the bevel angle on the DCS358?
Unlock the lever at the front of the base, tilt the base to achieve the desired angle up to 50°, then tighten the lever to lock the position.
Is the DCS358 equipped with a blade brake?
Yes, the DCS358 has a blade brake that quickly stops rotation after each cut, improving safety and precision.
How do I maintain the DCS358 saw to extend its lifespan?
Regularly clean the ventilation slots with a brush, wipe the housing with a dry cloth, check the tightness of the screws, and use a sharp blade.
What should I do if my DCS358 saw does not start?
Check the battery charge, insert it correctly, press the safety lock and then the switch. If the problem persists, contact DEWALT after-sales service.
Can I use 184 mm blades on the DCS358?
No, you must only use blades of 165 mm diameter. A larger blade could damage the blade guard and compromise your safety.
Is the DCS358 supplied with a battery and charger?
This depends on the kit purchased. Some models are sold with a battery and charger, others as bare tool. Check the list of accessories included in the box.
What safety precautions should be taken when using the DCS358?
Wear individual protective equipment (safety glasses, gloves, hearing protection), never remove the blade guard, hold the saw firmly, and disconnect the battery before any blade change.
User questions about DCS358 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual DCS358 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCS358 by DEWALT.
USER MANUAL DCS358 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DCS358
Category : Saw