600/10/100 VZ-PRO - Compressor GUDE - Free user manual and instructions
Find the device manual for free 600/10/100 VZ-PRO GUDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Piston air compressor |
| Brand | GUDE |
| Model | 600/10/100 VZ-PRO |
| Category | Compressor |
| Maximum pressure | 10 bar |
| Tank capacity | 100 litres |
| Intake air flow | 600 litres per minute |
| Motor power | Approximately 3 kW |
| Power supply | 400 V / 50 Hz three-phase |
| Dimensions (L x W x H) | Approximately 120 x 60 x 90 cm |
| Weight | Approximately 130 kg |
| Main functions | Air compression, pressure regulation, automatic shut-off, built-in pressure gauge |
| Maintenance and cleaning | Drain the tank condensate, clean the air filter, check the compressor oil |
| Safety | Safety valve, thermal circuit breaker, overpressure protection |
| Spare parts and repairability | Parts available from the manufacturer, standard repairability |
| General information | Designed for professional use, ideal for the workshop and industry |
Frequently Asked Questions - 600/10/100 VZ-PRO GUDE
How do I adjust the compressor output pressure?
Use the pressure regulator located on the gauge. Turn the knob clockwise to increase the pressure and counterclockwise to decrease it. The maximum pressure is 10 bar.
What regular maintenance is required?
Regularly check the oil level, clean the air filter, and drain the condensate from the tank. These simple operations extend the lifespan and maintain performance.
How do I drain the tank?
Place a container under the drain valve located at the bottom of the tank, open the valve, and let the water flow out. Then close the valve carefully.
What is the power of this compressor?
The 600/10/100 VZ-PRO model features a motor of approximately 3 kW, suitable for intensive professional use.
Can pneumatic tools be used with this compressor?
Yes, with a flow rate of 600 L/min and a pressure of 10 bar, this device can power most pneumatic tools such as impact wrenches, sanders, and paint guns.
How do I start the compressor?
Check the electrical supply, open the air valve, then press the ON/OFF switch. The motor starts automatically to fill the tank up to the maximum pressure.
What should I do in case of overheating?
Immediately stop the compressor and let it cool down. Check the ventilation, oil level, and air filter. If the problem persists, contact after-sales service.
What type of oil should I use?
Use a quality compressor oil, typically SAE 30 or a specific compressor oil. Check the level before each use.
How do I move the compressor?
Use the transport handles and wheels provided for this purpose. Hold the unit steadily and avoid inclined or uneven floors.
Where can I find spare parts?
Spare parts are available from the GUDE brand or authorized distributors. Contact customer support with the model number to identify the necessary parts.
User questions about 600/10/100 VZ-PRO GUDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual 600/10/100 VZ-PRO - GUDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 600/10/100 VZ-PRO by GUDE.
USER MANUAL 600/10/100 VZ-PRO GUDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GUDE
Model : 600/10/100 VZ-PRO
Category : Compressor