BC-PMX100-X - Paint mixer SCHEPPACH - Free user manual and instructions

Find the device manual for free BC-PMX100-X SCHEPPACH in PDF.

SCHEPPACH BC-PMX100-X - Paint mixer
📄 248 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SCHEPPACH BC-PMX100-X - page 15
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Paint and mortar mixer
Brand Scheppach
Model BC-PMX100-X
Power supply 230 V, 50 Hz
Rated power 1000 W
Rotation speed 0 to 600 rpm
Mixing capacity Up to 60 liters
Whisk thread M14
Dimensions (L × H × D) 60 × 25 × 18 cm
Net weight 4.5 kg
Cable length 2 m
Speed variator Electronic
Handle Ergonomic, non-slip
Protection class Double insulation (II)
Noise level 85 dB(A)
Care and cleaning Clean the whisk and the body with a damp cloth after each use
Safety Switch with lock, automatic shut-off in case of overload
Spare parts Available from Scheppach customer service
Repairability Repairable by a professional; standardized parts
General information Designed for domestic and semi-professional use

Frequently Asked Questions - BC-PMX100-X SCHEPPACH

What is the power of the BC-PMX100-X mixer?
The BC-PMX100-X has a power of 1000 W, which makes it easy to mix thick paints, plasters, and light mortars.
Can you mix mortar or concrete with this device?
Yes, it is designed to mix mortar, concrete, adhesives, and paints. However, for very heavy mixes, it is recommended not to exceed the 60-liter capacity and to use a suitable whisk.
How to change the whisk?
Always unplug the device before any change. Unscrew the whisk counterclockwise, then screw the new whisk onto the M14 thread. Tighten firmly by hand.
What speed should be used to mix paint?
For paint, start at slow speed until the paint is homogeneous, then gradually increase up to 300-400 rpm. Avoid maximum speeds to prevent splashing.
How to clean the device after use?
Unplug the device, remove the whisk, and clean it immediately with clean water. The body can be wiped with a damp cloth and dried thoroughly. Never immerse the motor in water.
Is the device suitable for intensive use?
The BC-PMX100-X is designed for intensive use during renovation work, but not for continuous professional use. Regular breaks are advised to avoid overheating.
What to do if the device heats up or smells burnt?
Stop the device immediately and unplug it. Let it cool down. Check that the ventilation slots are clear. If the smell persists, contact Scheppach customer service.
Can you use whisks from other brands?
Yes, provided they have an M14 thread. Check the compatibility of the whisk's diameter and length with the desired mixing capacity.
What safety precautions?
Wear safety goggles and a dust mask. Secure the container during mixing. Never touch the moving whisk and keep hands away from rotating areas. Use a residual current device.
How to store the device?
Store the device in a dry and clean place, protected from frost. Wind the cable without bending it and place the whisk in a location where it cannot deform. Ideally, use the original box.

User questions about BC-PMX100-X SCHEPPACH

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Paint mixer in PDF format for free! Find your manual BC-PMX100-X - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BC-PMX100-X by SCHEPPACH.

USER MANUAL BC-PMX100-X SCHEPPACH

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SCHEPPACH

Model : BC-PMX100-X

Category : Paint mixer