YFG716R - Range hood ELECTROLUX - Free user manual and instructions
Find the device manual for free YFG716R ELECTROLUX in PDF.
View the manual :
FR
BG
CS
DA
DE
EL
EN
ES
ET
FI
HU
IT
KK
LT
LV
MK
NL
NO
PL
PT
RO
RU
SK
SL
SQ
SR
SV
TR
UK
FR
BG
CS
DA
DE
EL
EN
ES
ET
FI
HU
IT
KK
LT
LV
MK
NL
NO
PL
PT
RO
RU
SK
SL
SQ
SR
SV
TR
UK
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted range hood |
| Brand | Electrolux |
| Model | YFG716R |
| Width | 60 cm |
| Height | 75 to 110 cm (telescopic duct) |
| Depth | 50 cm |
| Net weight | 15 kg |
| Power supply | 220-240 V, 50 Hz |
| Rated power | 220 W |
| Lighting | LED |
| Number of speeds | 3 + turbo position |
| Maximum extraction flow rate | 650 m³/h |
| Maximum noise level | 65 dB |
| Control type | Electronic push buttons |
| Material | Stainless steel and tempered glass |
| Filters | Washable aluminum grease filters |
| Air outlet diameter | 150 mm |
| Operating mode | Extraction or recirculation (with optional activated charcoal) |
| Energy class | C |
| Care and cleaning | Regular cleaning of the grease filters and the stainless steel surface |
| Safety | Automatic shut-off in case of overheating |
| Spare parts and repairability | Filters, LED bulbs and controls available |
| General information | Manufacturer's warranty 2 years |
Frequently Asked Questions - YFG716R ELECTROLUX
How do I clean the grease filters on my Electrolux YFG716R hood?
The aluminum grease filters should be removed regularly and washed by hand with hot water and detergent, or in the dishwasher at a low temperature. Dry them thoroughly before putting them back. Cleaning every 2 to 3 months is recommended depending on use.
How do I replace the hood's LED bulb?
First turn off the power supply. Locate the lighting compartment under the hood. Unclip the defective LED bulb and replace it with a compatible bulb (usually GU10 or similar). Check the reference in the manual. Reconnect the power and test the lighting.
Why is my hood noisier than usual?
Unusual noise can come from clogged grease filters, a partially blocked exhaust duct, or an object stuck in the turbine. Start by cleaning the filters and checking the duct. If the noise persists, contact after-sales service to check the motor.
How do I properly install the range hood?
Installation must follow the instructions in the manual. Drill holes in the wall according to the provided template, securely attach the wall bracket, then mount the hood. Make sure the exhaust duct is properly connected and all fasteners are tightened. It is recommended to call a professional to ensure compliance.
What is the recommended installation height between the cooktop and the hood?
The optimum distance is 65 to 75 cm for an electric or induction cooktop, and 75 to 85 cm for a gas cooktop. This height ensures effective extraction while avoiding any risk of the hood overheating.
How do I use the different speed modes?
The hood has 3 speeds and a turbo position. Use speed 1 for gentle cooking, speed 2 for normal cooking, and speed 3 or turbo for strong odors or frying. Run the turbo for a few minutes after cooking to purify the air.
What does extraction mode mean and how do I set the hood to recirculation mode?
Extraction mode expels air outdoors through a duct. In recirculation (or filtration) mode, air is filtered through an activated charcoal filter and then recirculated into the room. If your setup does not allow extraction, install the activated charcoal kit and make sure air circulates freely around the hood.
How do I remove the backdraft damper?
The backdraft damper is located at the air outlet of the hood. To remove it, gently unclip it by pushing the retaining tabs. This part prevents outside air from entering when the hood is off. If you need to clean it, use a damp cloth and reassemble it properly before any use.
My hood won't turn on anymore, what should I do?
First check that the hood is properly plugged in and that the circuit breaker has not tripped. Then check the controls and lighting. If none of these work, there may be a problem with the electronic board or the motor. In that case, call an authorized technician.
How do I order spare parts for this model?
You can order spare parts from Electrolux after-sales service by providing the hood reference (YFG716R) and the part number (visible on the label). Use the official website or contact an authorized dealer. Filters and bulbs are the most commonly replaced parts.
User questions about YFG716R ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual YFG716R - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YFG716R by ELECTROLUX.
USER MANUAL YFG716R ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : YFG716R
Category : Range hood