Dual Power POWDPO1110 - Drill PowerPlus - Free user manual and instructions
Find the device manual for free Dual Power POWDPO1110 PowerPlus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill driver |
| Brand | PowerPlus |
| Model | Dual Power POWDPO1110 |
| Nominal voltage | 18 V |
| Battery type | Lithium-ion |
| Battery capacity | 1.5 Ah |
| Chuck | Keyless, 10 mm |
| No-load speed (low) | 0-400 rpm |
| No-load speed (high) | 0-1500 rpm |
| Max tightening torque | 30 Nm |
| Drilling capacity wood | 25 mm |
| Drilling capacity metal | 10 mm |
| Drilling capacity concrete | 10 mm |
| Hammer mode | Yes |
| Rotation direction | Reversible |
| Motor brake | Yes |
| LED light | Yes |
| Weight with battery | 1.3 kg |
| Dimensions (L x W x H) | 24 x 18 x 7 cm |
| Power supply | Rechargeable battery 18 V |
| Maintenance and cleaning | Clean with a dry cloth, do not use water or solvents. |
| Safety | Wear safety goggles and a dust mask. |
| Spare parts and repairability | Battery, charger and chuck available as spare parts. Tool repairable. |
| Noise level | Approximately 70 dB(A) |
Frequently Asked Questions - Dual Power POWDPO1110 PowerPlus
What is the battery voltage of the POWDPO1110 drill?
The drill works with an 18 V Lithium-ion battery from the PowerPlus range. Use only the compatible charger supplied.
How do I adjust the tightening torque on the drill?
Turn the adjustment ring located just behind the chuck to select the tightening torque. Numbers 1 to 20 indicate increasing force. The drill symbol corresponds to drilling mode.
How do I activate hammer mode?
Hammer mode is activated by moving the selector located above the chuck to the hammer position. Use this mode for drilling into masonry or concrete.
How do I maintain the drill after use?
After each use, clean the outside with a dry cloth. Check that the ventilation slots are not blocked. Store the drill in a dry and clean place. Never use water to clean the tool.
What should I do if the drill does not start?
Check that the battery is correctly installed and charged. Make sure the rotation direction is not blocked. If the problem persists, contact PowerPlus customer service.
Can I use the drill for screwdriving?
Yes, the POWDPO1110 drill is also a screwdriver. Set the appropriate tightening torque to avoid damaging the screws. Use standard screwdriver bits.
What is the maximum rotation speed?
The drill has two speed ranges: 0-400 rpm in first and 0-1500 rpm in second. Select the speed suitable for the job.
How do I recharge the battery?
Plug the charger into a wall outlet and insert the battery. The indicator light shows charging in progress. Full charging takes about 1 hour. Unplug the charger once the battery is charged.
What safety precautions should I take?
Wear safety goggles, gloves and hearing protection. Keep your hands away from the rotating chuck. Never drill without firmly securing the workpiece.
How do I know if the battery is low?
The drill has a charge indicator on the battery or slows down when the battery is low. Recharge the battery as soon as you notice a drop in power.
User questions about Dual Power POWDPO1110 PowerPlus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual Dual Power POWDPO1110 - PowerPlus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Dual Power POWDPO1110 by PowerPlus.
USER MANUAL Dual Power POWDPO1110 PowerPlus
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PowerPlus
Model : Dual Power POWDPO1110
Category : Drill