POWC20110 - Saw PowerPlus - Free user manual and instructions
Find the device manual for free POWC20110 PowerPlus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Circular saw |
| Brand | PowerPlus |
| Model | POWC20110 |
| Power supply | 230 V, 50 Hz |
| Power | 1800 W |
| Blade diameter | 190 mm |
| Rotation speed | 4500 rpm |
| Maximum cutting depth | 65 mm |
| Cutting angle | 0° to 45° |
| Dimensions | 350 x 230 x 270 mm |
| Weight | 4.8 kg |
| Main functions | Straight and bevel cutting, laser guide, dust extraction port |
| Maintenance | Regular check of carbon brushes and tightening of parts |
| Cleaning | Dust off after use, clean with a slightly damp cloth |
| Safety | Automatic protective guard, shaft lock, safety switch |
| Spare parts | Blades, carbon brushes, covers, base plates available |
| Repairability | Repair possible by a professional, parts available |
| Warranty | 2 years |
| Package contents | Saw, parallel guide, hex key, instruction manual |
| General information | French manual available as PDF |
Frequently Asked Questions - POWC20110 PowerPlus
How do I replace the blade of my POWC20110 circular saw?
Unplug the saw, activate the shaft lock, unscrew the blade bolt with the provided wrench, replace the blade respecting the rotation direction, then tighten firmly.
What is the maximum cutting depth?
The maximum cutting depth is 65 mm at 90° and 45 mm at 45°.
How do I adjust the cutting angle?
Loosen the angle adjustment knob, tilt the base plate to the desired angle using the graduations, then tighten the knob.
What type of blade should I use?
Use a 190 mm diameter blade with a compatible bore. Make sure the blade's maximum speed is higher than that of the saw.
Does the saw have a vacuum hose connection?
Yes, a dust extraction port is provided to connect a vacuum and reduce dust during cutting.
How do I change the motor carbon brushes?
Unscrew the motor side caps, remove the old brushes, insert the new ones respecting their orientation, then screw the caps back on.
What should I do if the saw does not start?
Check the power outlet, the power cord, and the fuse. If the problem persists, contact customer service.
Can I use 180 mm blades?
No, use exclusively 190 mm blades to guarantee the safety and performance of the saw.
How do I adjust the cutting depth?
Loosen the depth adjustment lever, adjust the base plate according to the desired depth, then tighten the lever.
How do I maintain the saw?
Clean the ventilation slots, dust off the base plate and blade, and regularly check the tightening of screws and the condition of the carbon brushes.
User questions about POWC20110 PowerPlus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual POWC20110 - PowerPlus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POWC20110 by PowerPlus.
USER MANUAL POWC20110 PowerPlus
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PowerPlus
Model : POWC20110
Category : Saw