HRS250 - Uncategorized SCHEPPACH - Free user manual and instructions
Find the device manual for free HRS250 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hand-held circular saw |
| Brand | Scheppach |
| Model | HRS250 |
| Power source | Corded electric |
| Voltage | 230 V AC, 50 Hz |
| Power rating | 2000 W |
| No-load speed | 4,800 rpm |
| Blade diameter | 250 mm |
| Blade bore diameter | 30 mm |
| Cutting depth at 90° | 85 mm |
| Cutting depth at 45° | 62 mm |
| Bevel capacity | 0–45° |
| Weight | 7.5 kg |
| Dimensions (L × W × H) | 500 × 280 × 290 mm |
| Power cord length | 3 m |
| Protection class | Class II (double insulated) |
| Dust extraction port | 35 mm hose adapter |
| Safety features | Safety guard, spindle lock, double insulation |
| Maintenance | Clean air vents, replace carbon brushes periodically |
| Spare parts availability | Replacement blades, brushes, and guide plates |
| General information | Designed for cutting wood and wood-based materials |
Frequently Asked Questions - HRS250 SCHEPPACH
How do I change the saw blade on the Scheppach HRS250?
To change the blade, first disconnect the saw from the power supply. Use the spindle lock to hold the blade still, then loosen the blade bolt with a wrench. Remove the old blade and mount the new one with the teeth facing the direction of rotation. Tighten securely before use. Always wear protective gloves when handling the blade.
What is the maximum cutting depth of the HRS250?
The maximum cutting depth at 90° is 85 mm and at 45° is 62 mm. Adjust the depth using the adjustment lever on the base plate.
Can the HRS250 cut materials other than wood?
While the saw is designed mainly for wood and wood-based materials, it can also cut non-ferrous metals and plastics with appropriate blades. However, always select a blade suitable for the material and reduce the feed rate.
How do I adjust the bevel angle on the HRS250?
Loosen the bevel locking knob, set the desired angle (0–45°) using the scale, and retighten the knob securely. Make a test cut on scrap material to verify the angle.
Why does the saw vibrate excessively during operation?
Excessive vibration is often caused by a blunt or damaged blade, improper mounting, or debris inside the saw. Check that the blade is sharp and correctly installed. Clean the air vents and blade guard regularly.
How do I connect a vacuum cleaner for dust extraction?
The HRS250 features a 35 mm dust extraction port on the rear. Attach a compatible vacuum hose or a workshop vacuum to keep the work area clean.
What should I do if the saw sparks heavily while cutting?
Heavy sparking can be due to worn carbon brushes or a damaged armature. Inspect the brushes and replace them if they are shorter than 5 mm. If the problem persists, contact a service center.
How do I replace the carbon brushes?
Disconnect the saw, unscrew the brush caps, and remove the old brushes. Insert new brushes, ensuring they fit properly, and replace the caps. Run the saw for a few minutes to seat the brushes.
Is the HRS250 double insulated?
Yes, the saw is Class II double insulated, so it does not require an earth wire. However, always use a residual current device for additional safety.
What is the correct blade type for the HRS250?
The saw uses blades with a 250 mm diameter and a 30 mm bore. Use high-quality saw blades with carbide tips for clean cuts in wood. Always check the maximum speed rating of the blade (≥4,800 rpm).
User questions about HRS250 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HRS250 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HRS250 by SCHEPPACH.
USER MANUAL HRS250 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : HRS250
Category : Uncategorized