C-JAD-L - Uncategorized SCHEPPACH - Free user manual and instructions
Find the device manual for free C-JAD-L SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Scheppach |
| Model | C-JAD-L |
| Motor Power | 1.5 kW |
| Tank Capacity | 24 L |
| Max Pressure | 8 bar |
| Air Delivery | 200 L/min |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Dimensions (L x W x H) | 50 x 25 x 45 cm |
| Weight | 20 kg |
| Noise Level | 97 dB |
| Protection Rating | IP20 |
| Main Features | Pressure gauge, safety valve, transport handle |
| Maintenance | Drain tank daily, replace air filter annually |
| Safety | Overload protection, thermal cut-off |
| Spare Parts | Available via Scheppach service centers |
| Repairability | Repairable; typical parts available |
| Manual | 328 pages, multilingual PDF |
| Warranty | 2 years manufacturer warranty |
Frequently Asked Questions - C-JAD-L SCHEPPACH
How do I change the oil in my C-JAD-L compressor?
First, run the compressor for a few minutes to warm the oil. Turn off and unplug the unit. Place an oil pan under the drain valve and open it. When drained, close the valve and refill with SAE 30 oil through the oil fill plug. Do not overfill.
What is the maximum pressure of the C-JAD-L?
The maximum pressure is 8 bar (115 psi). You should set the pressure switch according to your tool's requirements. Never exceed this limit to avoid damaging the compressor or connected tools.
How often should I drain the air tank?
You should drain the air tank daily or after each use to remove moisture and prevent corrosion. Open the drain valve at the bottom and let the water run out until no more moisture appears.
Why is my compressor not building pressure?
Check if the air filter is clogged or the intake valve is dirty. Also inspect the pressure gauge and check for leaks in hoses and fittings. A damaged reed valve can also cause low pressure. Clean or replace worn parts.
Can I use the C-JAD-L to power a paint spray gun?
Yes, the C-JAD-L can power small paint spray guns and airbrushes. Check the air delivery of your spray gun and adjust the pressure to match your tool's requirements. Use a moisture trap for best results.
What is the duty cycle of this compressor?
The typical duty cycle for this compressor is S3 50%, meaning it can run for 5 minutes and should rest for 5 minutes when under load. This prevents overheating and extends the motor life.
How do I adjust the pressure regulator?
Turn the pressure regulator knob clockwise to increase pressure and counterclockwise to decrease. Monitor the pressure gauge to set your desired pressure. Lock the knob in place by pulling it out or tightening the lock ring.
What type of oil should I use?
Use non-detergent compressor oil with a viscosity of SAE 30. This oil is designed for air compressors and provides proper lubrication at high temperatures. Do not use car engine oil with additives.
How do I clean the air filter?
Remove the air filter cover and take out the filter element. Wash it in warm soapy water and let it dry completely. Alternatively, blow it with compressed air. Do not use oil on the filter. Replace if damaged.
Where can I find spare parts and service for the C-JAD-L?
Spare parts are available from Scheppach service centers and authorized dealers. You can also order online using the model number. For repairs, contact a qualified technician. Regular maintenance will prolong your compressor's service life.
User questions about C-JAD-L SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual C-JAD-L - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C-JAD-L by SCHEPPACH.