Mitas 5 - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free Mitas 5 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Table saw |
| Brand | SCHEPPACH |
| Model | Mitas 5 |
| Supply voltage | 230 V ~ 50 Hz |
| Motor power | 2000 W |
| No-load speed | 4500 rpm |
| Blade diameter | 250 mm |
| Cutting depth at 90° | 80 mm |
| Cutting depth at 45° | 55 mm |
| Table dimensions | 640 x 530 mm |
| Weight | approx. 42 kg |
| Main functions | Rip, cross and bevel cuts |
| Safety system | Blade guard, safety switch, emergency stop |
| Maintenance and cleaning | Clean the blade and table after use, dust the ventilation openings |
| Spare parts | Blades, belts, guards available from Scheppach |
| Repairability | Repairable device, spare parts available |
| Recommended use | DIY workshop and semi-professional use |
| Warranty | 2-year manufacturer warranty |
Frequently Asked Questions - Mitas 5 SCHEPPACH
What is the motor power of the Mitas 5 saw?
The Mitas 5 saw from Scheppach is equipped with a motor with a power of 2000 W, allowing it to cut hard and soft woods with great ease.
What is the maximum cutting depth?
The maximum cutting depth is 80 mm at 90° and 55 mm at 45°, allowing you to work with thick boards and make bevel cuts.
How to change the saw blade?
To change the blade, unplug the machine, remove the blade guard, loosen the arbor with a wrench or suitable tool, replace the blade, then tighten and reinstall the guard. Make sure the blade is securely fastened before restarting.
What type of blade is recommended?
It is recommended to use a blade of 250 mm diameter with a bore adapted to the arbor. For general cuts, a carbide blade with fine teeth is recommended. Only use blades that comply with ANV standards intended for this machine.
How to adjust the cutting angle?
The cutting angle can be adjusted using the locking lever located under the table. Loosen the lever, tilt the blade to the desired angle (usually between 0° and 45°) and tighten the lever. Make sure the blade is perpendicular to the table for a precise cut.
How to use the parallel guide?
The parallel guide attaches to the table and allows precise rip cuts. Place the guide parallel to the blade, set the desired distance, lock it, then guide the workpiece along the guide using a push stick for small pieces.
What are the important safety instructions?
Always wear safety glasses and avoid loose clothing. Use the blade guard, the push stick for short pieces and the emergency stop switch. Never place your hands near the rotating blade. Wait for the blade to come to a complete stop before touching the workpiece.
How to clean and maintain the saw?
After use, unplug the saw and clean the blade and table with a soft brush. Vacuum sawdust from the ventilation openings and around the motor. Regularly check the condition of the blade and replace it if it is dull or damaged.
Where to find spare parts?
Spare parts such as blades, belts and guards are available from authorized Scheppach dealers or online on the official website. Contact customer service to get the exact reference for the part to order.
Is this saw suitable for professional use?
The Mitas 5 saw is designed for intensive DIY workshop and semi-professional use. It offers reliable performance for regular work, but for continuous industrial use, a higher-range model would be more suitable.
User questions about Mitas 5 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual Mitas 5 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mitas 5 by SCHEPPACH.
USER MANUAL Mitas 5 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : Mitas 5
Category : Saw