ws 600 - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free ws 600 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Table saw |
| Brand | SCHEPPACH |
| Model | ws 600 |
| Table dimensions | 600 x 400 mm |
| Tool dimensions (L x W x H) | 80 x 60 x 40 cm |
| Weight | 25 kg |
| Power supply voltage | 230 V / 50 Hz |
| Motor power | 2000 W |
| No-load speed | 4500 rpm |
| Blade diameter | 250 mm |
| Blade bore | 30 mm |
| Maximum cutting depth at 90° | 70 mm |
| Maximum cutting depth at 45° | 45 mm |
| Blade tilt range | 0° to 45° |
| Dust extraction connection | Diameter 35 mm |
| Main functions | Rip, cross and bevel cutting |
| Maintenance and cleaning | Dust regularly, clean the table with a dry cloth |
| Safety | Protective cover, push stick, safety switch |
| Spare parts and repairability | Replacement blade, carbon brushes available |
| Warranty | 2 years |
Frequently Asked Questions - ws 600 SCHEPPACH
What is the maximum cutting depth of the WS 600 saw?
The maximum cutting depth is 70 mm at 90° and 45 mm at 45°.
How do I change the blade on my WS 600 saw?
Unplug the machine, wear gloves, unlock the blade with the supplied wrench, remove the flange and the blade, then install the new blade respecting the indicated rotation direction.
How do I connect a vacuum cleaner to the saw?
Use the 35 mm dust extraction port located at the rear of the machine to connect a compatible vacuum cleaner.
How do I adjust the cutting height?
Turn the height adjustment crank to raise or lower the blade to the desired depth.
How do I tilt the blade at 45 degrees?
Unlock the tilt adjustment handle, tilt the blade to the 45° angle indicated on the protractor, then re-tighten the handle.
What type of replacement blade should I use?
Use a 250 mm diameter blade with a 30 mm bore, compatible with table saws.
How do I clean the saw table?
Unplug the tool, dust the table and grooves with a brush, then wipe with a slightly damp cloth.
What to do if the saw does not start?
Check the plug and power cable, the fuse, and the safety switch. If the problem persists, consult an electrician.
How to use the push stick safely?
Always use the push stick to guide workpieces near the blade, keeping your hands away from the cutting area.
What are the important safety precautions?
Wear safety glasses, do not wear loose clothing, use the protective cover, and unplug the tool when changing the blade.
User questions about ws 600 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual ws 600 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ws 600 by SCHEPPACH.
USER MANUAL ws 600 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : ws 600
Category : Saw