POWDP7058 - Paint gun PowerPlus - Free user manual and instructions
Find the device manual for free POWDP7058 PowerPlus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric paint spray gun |
| Brand | PowerPlus |
| Model | POWDP7058 |
| Power supply | 230 V ~ 50 Hz |
| Power | 650 W |
| Reservoir capacity | 800 ml |
| Spray width | 100 - 250 mm (adjustable) |
| Nozzle diameter | 2.5 mm |
| Paint flow rate | 500 ml/min (approx) |
| Maximum viscosity | 50 DIN-s |
| Weight | 1.4 kg |
| Dimensions (L × W × H) | 280 × 120 × 280 mm |
| Air hose length | 1.5 m |
| Sound pressure level | 85 dB(A) |
| Flow rate adjustment | Yes, dial |
| Spray width adjustment | Yes, dial |
| Cleaning | Rinse with water or solvent after use |
| Safety | Overheat protection |
| Spare parts | Nozzle, seals, trigger |
| Usage | Acrylic paints, varnishes, stains |
Frequently Asked Questions - POWDP7058 PowerPlus
How to prepare the paint before use?
Thin the paint if necessary to obtain a suitable consistency. The recommended maximum viscosity is 50 DIN-s. Mix thoroughly and filter to avoid lumps.
What is the reservoir capacity?
The reservoir has a capacity of 800 ml, which covers about 3 to 4 m² per fill depending on thickness.
How to adjust the spray width?
Turn the dial located on the nozzle to widen or narrow the jet. The adjustable width is 100 to 250 mm.
How to clean the gun after use?
Empty the reservoir, rinse it with a suitable solvent or water for water-based paints. Run the appliance for a few seconds to purge the conduit. Wipe the nozzle.
What is the power supply voltage?
The appliance operates from the mains with a voltage of 230 V and a frequency of 50 Hz.
Can this gun be used for latex?
Yes, provided the latex is diluted with water to obtain the appropriate viscosity. Use the 2.5 mm nozzle for thick paints.
What accessories are included?
Generally, the gun is delivered with a cup, a nozzle, an adjustment dial and a measuring cup. See the accessories list in the manual.
How to avoid runs?
Apply regular and uniform passes, maintain a constant distance of about 15 to 20 cm. Do not overload the surface and set the paint flow to the minimum position.
What to do if the nozzle is clogged?
Unplug the appliance, remove the nozzle and clean it with a small wire or a needle. Soak it in a solvent to dissolve residues.
How to maintain the appliance in the long term?
After each use, clean the appliance thoroughly. Check the condition of the seals and replace worn parts. Store it in a dry place away from dust.
User questions about POWDP7058 PowerPlus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual POWDP7058 - PowerPlus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POWDP7058 by PowerPlus.
USER MANUAL POWDP7058 PowerPlus
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PowerPlus
Model : POWDP7058
Category : Paint gun