POWDP77500 - Uncategorized PowerPlus - Free user manual and instructions
Find the device manual for free POWDP77500 PowerPlus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric pressure washer |
| Brand | PowerPlus |
| Model | POWDP77500 |
| Power supply | 230 V / 50 Hz |
| Rated power | 1800 W |
| Maximum operating pressure | 130 bar |
| Water flow rate | 420 L/h |
| Maximum water temperature | 40 °C |
| Power cable length | 5 m |
| High-pressure hose length | 5 m |
| Detergent tank | Integrated, capacity 0.8 L |
| Protection level | IPX5 |
| Dimensions (L × W × H) | 350 × 280 × 600 mm |
| Net weight | 8.5 kg |
| Main functions | Rotating jet lance, variable jet nozzle, detergent injection |
| Safety | Motor anti-blocking system, automatic shutdown in case of overheating |
| Maintenance and cleaning | Regular cleaning of the water inlet filter, draining the pump after use |
| Spare parts and repairability | Hose, lance, nozzles and seals available separately |
| Warranty | 2 years |
Frequently Asked Questions - POWDP77500 PowerPlus
How do I connect the pressure washer?
Connect the power cable to a 230 V socket and check that the water inlet hose is properly connected to the tap before switching on.
How do I turn on the device?
After opening the water tap, press the on/off button on the housing. Never run the pump without water to avoid damage.
What is the maximum pressure of the device?
The maximum operating pressure is 130 bar, which allows effective cleaning of exterior surfaces, vehicles and driveways.
What type of detergent should I use?
Use a non-foaming high-pressure detergent or a suitable cleaning product. Fill the integrated tank and use the lance in low-pressure mode for application.
How do I maintain the pump after each use?
After use, disconnect the water supply and run the device for a few seconds to drain residual water from the pump. You can also add an antifreeze product in winter.
What should I do if the pressure is low?
Check that the water inlet filter is not clogged, the nozzle is not worn and the hose is not bent. An insufficient water flow or a leak can also reduce pressure.
How do I store the high-pressure hose?
Wind the hose into large loops without twisting it and store it on the holder provided for this purpose. Avoid exposing it to direct sunlight to extend its lifespan.
Can hot water be used?
No, the maximum inlet water temperature is 40 °C. Using hot water can damage the pump and internal seals.
What spare parts are available?
Parts such as the high-pressure hose, lance, nozzles and sealing rings are available from the PowerPlus after-sales service.
How do I bleed the air after connection?
Before switching on, open the water tap and press the lance trigger until water flows without bubbles. This step removes air from the circuit and protects the pump.
User questions about POWDP77500 PowerPlus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual POWDP77500 - PowerPlus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POWDP77500 by PowerPlus.
USER MANUAL POWDP77500 PowerPlus
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PowerPlus
Model : POWDP77500
Category : Uncategorized