Ox 7-2020 - Log splitter SCHEPPACH - Free user manual and instructions
Find the device manual for free Ox 7-2020 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Horizontal log splitter |
| Brand | SCHEPPACH |
| Model | OX 7-2020 |
| Splitting force | 7 tonnes |
| Power supply | 230 V / 50 Hz |
| Motor power | 2200 W |
| Dimensions (L × W × H) | 125 × 45 × 90 cm |
| Weight | 75 kg |
| Max log length | 52 cm |
| Max log diameter | 25 cm |
| Hydraulic oil | ISO VG 32, 2.5 L |
| Hydraulic system | Horizontal cylinder with automatic return |
| Control | Foot pedal and control lever |
| Maintenance and cleaning | Clean after each use, check oil level and fittings |
| Safety | Transparent guard, emergency stop, two-hand control |
| Spare parts | Cylinders, seals, pumps and maintenance kits available at notice-facile.com |
| Repairability | Repairability index 7.5/10 |
| General information | Machine designed for intensive domestic use |
Frequently Asked Questions - Ox 7-2020 SCHEPPACH
What type of hydraulic oil should I use for the SCHEPPACH OX 7-2020?
Use a high-quality ISO VG 32 hydraulic oil. The circuit contains approximately 2.5 liters. Check the level before each use and top up if necessary.
How do I change the hydraulic oil of the log splitter?
Place the machine horizontally, remove the drain plug, collect the used oil in a container. Close it again, then introduce the new oil through the filling opening without exceeding the max level. Bleed the circuit by operating the pedal.
What should I do if the log splitter does not start?
First check the power supply and the cable. Then check the residual current circuit breaker and the emergency stop button. If the motor still does not run, the capacitor or the motor may be defective.
What is the maximum log length I can split?
The SCHEPPACH OX 7-2020 accepts logs with a maximum length of 52 cm and a diameter of 25 cm. Beyond that, the machine could jam.
Can I split green or wet wood?
Yes, the splitter can split green wood and wet wood, but this increases resistance. Be careful not to exceed the 7-tonne splitting force and use a slow, steady movement.
How do I maintain the log splitter after each use?
Clean the machine to remove chips and debris. Check the hydraulic oil level, hoses and fittings. Lubricate moving parts with a light oil.
How do I adjust the working height?
The work table height is preset at the factory. On the OX 7-2020 model, it is fixed to ensure stability. If you need to adjust it, use shims under the feet.
Is the machine equipped with safety devices?
Yes, the splitter has a transparent guard that prevents debris, an emergency stop and a two-hand control to prevent accidents.
Where can I find spare parts for the SCHEPPACH OX 7-2020?
Spare parts such as hydraulic cylinders, seals and pumps are available at notice-facile.com. Use the reference OX 7-2020 to identify compatible parts.
What electrical power is required to operate this log splitter?
The machine operates on a 230 V / 50 Hz outlet with a 2200 W motor. Provide a circuit protected by a minimum 16 A circuit breaker.
User questions about Ox 7-2020 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Log splitter in PDF format for free! Find your manual Ox 7-2020 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ox 7-2020 by SCHEPPACH.
USER MANUAL Ox 7-2020 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : Ox 7-2020
Category : Log splitter