Ox 7-1320 - Log splitter SCHEPPACH - Free user manual and instructions
Find the device manual for free Ox 7-1320 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Horizontal wood splitter |
| Brand | Scheppach |
| Model | Ox 7-1320 |
| Splitting force | 7 tonnes |
| Maximum log length | 1320 mm |
| Maximum log diameter | 250 mm |
| Motor power | 2200 W |
| Supply voltage | 230 V / 50 Hz |
| Net weight | 85 kg |
| Dimensions (L × W × H) | 2100 × 400 × 900 mm |
| Motor type | Electric induction motor |
| Oil tank capacity | 5 L |
| Hydraulic pressure | 210 bar |
| Splitting speed | 4 cm/s |
| Control | Pedal and safety handle |
| Blade | Hardened steel |
| Hydraulic system | Double-acting cylinder |
| Transport wheels | 2 wheels with pneumatic tires |
| Maintenance level | Low, regular cleaning |
| Repairability | Spare parts available |
| Safety | Emergency stop and blade guard |
| Warranty | 2 years |
| Usage | Domestic and semi-professional |
Frequently Asked Questions - Ox 7-1320 SCHEPPACH
Which hydraulic oil should I use for my Scheppach Ox 7-1320 log splitter?
Use a hydraulic oil of type H32 or equivalent. Check the level with the dipstick and top up if necessary. Change the oil after the first 50 hours of operation, then every 500 hours.
How do I change the blade of the splitter?
Unplug the machine, remove the blade mounting screws, replace it with a new hardened steel blade. Tighten the screws to a torque of 50 Nm. Wear protective gloves.
Why won't the motor start?
Check the power supply, the fuse and the safety switch. Make sure the emergency stop button is not pressed. If the problem persists, consult the electrical circuit.
What is the maximum splitting capacity?
The splitting force is 7 tonnes, allowing to split logs up to 250 mm in diameter and 1320 mm in length. For hard woods like oak, reduce the diameter.
How do I transport the log splitter?
Use the transport wheels and the provided handle. Fold the cylinder to the lower position and secure the machine firmly. Lock the wheels when towing.
What regular maintenance is required?
Clean the machine after each use, grease the moving parts, check the hydraulic oil level and the blade condition. Inspect the hoses for any leaks.
Can you split green or wet wood?
Yes, the splitter can handle green wood. However, wet wood puts additional pressure on the hydraulic system. It is recommended to split dry wood to preserve the lifespan of the components.
What safety precautions should be followed?
Wear safety glasses and protective gloves. Keep hands away from the splitting area. Use both hands to operate the controls. Never wear loose clothing.
What to do in case of a hydraulic oil leak?
Stop the machine immediately. Locate the leak and replace the defective seals. Fill with H32 oil and bleed the circuit. Consult the manual for detailed steps.
How to store the log splitter?
Clean the machine, drain the oil tank if storing for an extended period, and cover it with a tarp. Store it in a dry, frost-free place. Fold down the moving parts.
User questions about Ox 7-1320 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Log splitter in PDF format for free! Find your manual Ox 7-1320 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ox 7-1320 by SCHEPPACH.
USER MANUAL Ox 7-1320 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : Ox 7-1320
Category : Log splitter