HP2FD10CS90B - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HP2FD10CS90B HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hotpoint |
| Model | HP2FD10CS90B |
| Product type | Freestanding slimline dishwasher |
| Place settings | 10 |
| Width | 450 mm |
| Height | 850 mm |
| Depth | 590 mm |
| Weight | 38 kg |
| Colour | Black |
| Noise level | 46 dB(A) |
| Energy efficiency class | E |
| Number of wash programmes | 6 |
| Water consumption per cycle | 9.5 litres |
| Energy consumption per cycle | 0.74 kWh |
| Power supply | 220-240 V, 50 Hz |
| Water connection | Cold water only |
| Delay start | Yes |
| Half load option | Yes |
| Self-cleaning filter | Yes |
| Adjustable upper basket | Yes |
| Rinse aid and salt indicators | Yes |
| Control type | Electronic push button |
| Spare parts availability | Available from Hotpoint after-sales service |
Frequently Asked Questions - HP2FD10CS90B HOTPOINT
How do I clean the dishwasher filter?
Turn off the appliance and remove the bottom rack. Unscrew the cylinder filter by turning it anticlockwise, remove the flat filter and rinse both under running water. Use a soft brush to remove trapped particles. Refit both parts securely before starting the next wash.
Why is my dishwasher not draining?
Check for a blocked drain hose or a clogged filter. Make sure the sink trap is not obstructed and the hose is not kinked. Inspect the drain pump impeller if the issue continues. Clean the filter and run a rinse cycle.
How do I add rinse aid?
Open the rinse aid dispenser on the inner door, press the lid until it clicks open and pour in rinse aid up to the max level. Close the cap carefully and adjust the dosage setting according to your water hardness.
Can I put wooden items in the dishwasher?
No, wooden cutting boards and wooden spoons can warp and crack in the dishwasher. Also avoid non-dishwasher-safe plastics, copper, pewter and hand-painted ceramics.
What does error E1 mean?
E1 usually signals a water supply problem. Check that the tap is open, the inlet hose is not kinked and the water pressure is sufficient. Turn the dishwasher off, wait a few minutes, and restart.
How do I descale the dishwasher?
Use a commercial dishwasher cleaner or a citric acid solution. Run an empty 65°C programme with the cleaner on the top rack. Repeat every three months in hard water areas.
What is the best way to load the dishwasher?
Place large pots and plates on the bottom rack and glasses/cups on the top rack. Aim heavily soiled surfaces toward the spray arms. Avoid blocking the arms so water reaches every item.
Why is there white residue on my dishes?
White residue is usually caused by hard water or low rinse aid. Check the salt reservoir and refill, increase the rinse aid dosage, and clean the filter to improve washing performance.
How do I install this dishwasher?
Connect the inlet hose to a cold water supply with a 3/4 inch tap, secure the drain hose in the sink trap or wastepipe, and level the dishwasher by adjusting the feet. Plug it into an earthed socket.
How long does a standard cycle take?
A normal Eco programme lasts about 2.5 hours. Quick programmes may take 30-40 minutes, depending on temperature, load and soil level. Always check the display for remaining time.
User questions about HP2FD10CS90B HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HP2FD10CS90B - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HP2FD10CS90B by HOTPOINT.
USER MANUAL HP2FD10CS90B HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : HP2FD10CS90B
Category : Dishwasher