WMK 40940 WH - Washing machine TEKA - Free user manual and instructions
Find the device manual for free WMK 40940 WH TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Front-load washing machine |
| Brand | TEKA |
| Model | WMK 40940 WH |
| Color | White |
| Capacity | 9 kg |
| Spin Speed | 1400 rpm |
| Dimensions (H x W x D) | 85 cm x 60 cm x 55 cm |
| Weight | 65 kg |
| Energy Efficiency Class | A+++ |
| Washing Programs | 15 |
| Noise Level (Wash/Spin) | 58 dB / 76 dB |
| Water Consumption per Cycle | 52 L |
| Annual Energy Consumption | 180 kWh |
| Display | LED |
| Delay Start | Yes (up to 24 h) |
| Child Lock | Yes |
| Anti-Flood Protection | Yes |
| Drum Material | Stainless steel |
| Motor Type | Inverter motor |
| Power Supply | 220-240 V, 50 Hz |
Frequently Asked Questions - WMK 40940 WH TEKA
How do I clean the detergent drawer of my TEKA WMK 40940 WH?
Remove the drawer by pressing the release tab and pulling it out. Rinse it under warm water and scrub with a soft brush. Dry it thoroughly before reinserting. For stubborn residue, soak in a mild vinegar solution.
What should I do if the washing machine does not drain?
Check the drain hose for kinks or blockages. Clean the pump filter located at the bottom front of the machine. Ensure the filter cap is tightened properly after cleaning. If the problem persists, contact technical support.
How often should I descale my TEKA WMK 40940 WH?
Descaling frequency depends on water hardness. For medium-hard water, run a descaling program every 3 months. Use a suitable washing machine descaler and follow the instructions on the product.
Can I use a 60°C wash for delicate fabrics?
Delicate fabrics like silk or wool should be washed on dedicated programs with cold or warm water (max 30-40°C). Always check the care label on the garment.
What does the 'Quick Wash' program do?
The Quick Wash program is designed for lightly soiled clothes, completing a full cycle in about 30 minutes. It uses less water and energy but is not suitable for heavily stained items.
How can I reduce the spin noise of my washing machine?
Ensure the appliance is level by adjusting the feet. Check that the load is balanced and not overloaded. Excessive noise may also be due to foreign objects (coins, buttons) in the drum.
What is the maximum recommended load for a full cycle?
The TEKA WMK 40940 WH has a capacity of 9 kg for cotton programs. For other fabrics, reduce the load (e.g., 4 kg for delicates, 1 kg for wool). Overloading can affect washing performance.
How do I clean the door seal and prevent mold?
Wipe the door gasket and glass after each use to remove moisture. Clean the seal regularly with a damp cloth and mild detergent, and dry it thoroughly. Leave the door open to allow ventilation.
What should I do if the display shows an error code?
Refer to the user manual's error code table. Common codes like E20 indicate drainage issues, while E10 means water supply problems. Turn off the machine, unplug it, and check the relevant parts before restarting.
Can I install the machine under a countertop?
Yes, the WMK 40940 WH is a freestanding model but can be installed under a countertop. Ensure there is space for ventilation and access to hoses. The top panel can be removed for under-counter installation.
User questions about WMK 40940 WH TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WMK 40940 WH - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WMK 40940 WH by TEKA.
USER MANUAL WMK 40940 WH TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : WMK 40940 WH
Category : Washing machine