Deco 401 - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free Deco 401 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | SCHEPPACH |
| Model | Deco 401 |
| Product type | Table saw |
| Category | Saw |
| Supply voltage | 230 V / 50 Hz |
| Motor power | 1200 W |
| Blade diameter | 250 mm |
| Blade arbor | 30 mm |
| No-load speed | 4500 rpm |
| Max. cutting depth | 70 mm at 90° |
| Table dimensions | 640 x 480 mm |
| Device dimensions | 850 x 700 x 900 mm |
| Weight | 35 kg |
| Main functions | Rip, cross and miter cuts |
| Care and cleaning | Dust off the table and the guard, check and clean the blade after each use |
| Safety | Protective cover, safety switch, push stick included |
| Spare parts and repairability | Available from after-sales service and authorized SCHEPPACH dealers |
| General information | User manual and operating instructions free, 86 pages in PDF format |
Frequently Asked Questions - Deco 401 SCHEPPACH
How do I set the cutting depth on the SCHEPPACH Deco 401?
Loosen the locking lever on the guard, adjust the platform to the desired height, then tighten firmly. Make sure the blade does not come into contact with the table before switching on.
What type of blade should I use for the Deco 401?
The SCHEPPACH Deco 401 accepts a 250 mm blade with a 30 mm arbor. Choose a blade suitable for the material and type of cut.
How do I change the saw blade?
Unplug the device, lock the blade with the supplied wrench, unscrew the nut counterclockwise, then replace the blade. Reassemble in reverse order and make sure the blade spins freely.
How do I use the parallel guide?
Insert the guide into the table slots, adjust the distance between the guide and the blade using the scale, then lock the handle. The guide enables straight and safe cuts.
How do I clean the SCHEPPACH Deco 401?
Always unplug the machine before cleaning. Vacuum the sawdust from the table and the guard, wipe the surfaces with a slightly damp cloth and protect the blade against corrosion.
What accessories are included with the saw?
The delivery includes the saw, the 250 mm blade, the parallel guide, the push stick, the mounting wrench and the user manual. Some accessories may vary depending on the version sold.
How do I assemble the table saw?
Mount the legs or the base, attach the table to the frame, install the blade in the correct rotation direction, then connect the parallel guide. Refer to the manual for recommended tightening torques.
What should I do if the blade no longer turns?
First check the power supply and the power cord. If the motor still does not start, check the capacitor and the brushes. Contact customer service if necessary.
How do I make an angled cut?
Tilt the table or the blade to the desired angle using the tilt wheel, lock the position and use the guide. The maximum cutting depth at an angle is less than at 90°.
Where can I find spare parts for the Deco 401?
Spare parts are available from authorized dealers and SCHEPPACH after-sales service. Specify the part reference and the exact model to receive the correct part.
User questions about Deco 401 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual Deco 401 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Deco 401 by SCHEPPACH.
USER MANUAL Deco 401 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : Deco 401
Category : Saw