Deco 402 - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free Deco 402 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Table saw |
| Brand | SCHEPPACH |
| Model | Deco 402 |
| Blade diameter | 400 mm |
| Motor power | 3000 W |
| Rotation speed | 2800 rpm |
| Supply voltage | 230 V / 50 Hz |
| Net weight | 85 kg |
| Dimensions (L x W x H) | 1200 x 800 x 1000 mm |
| Cutting height at 90° | 130 mm |
| Cutting height at 45° | 90 mm |
| Cast aluminum table | Yes |
| Table extensions | Included for long pieces |
| Parallel guide | Adjustable with integrated scale |
| Miter gauge | Included |
| Suction nozzle | Diameter 60 mm |
| Safety switch | Emergency stop and motor protection |
| Blade guard | Adjustable |
| Maintenance and cleaning | Regular cleaning and check of fastenings |
| Safety | CE compliant, use with protective equipment |
| Spare parts | Available from after-sales service |
| General information | Operating instructions included |
Frequently Asked Questions - Deco 402 SCHEPPACH
What is the power of the Scheppach Deco 402 saw?
The Scheppach Deco 402 saw has a 3000 W motor that offers a large cutting capacity for woodworking tasks.
How do I change the cutting blade?
To change the blade, unplug the machine, raise the guard, loosen the nut using the supplied wrench, replace the blade respecting the indicated rotation direction, then tighten firmly.
What is the maximum cutting height?
The maximum cutting height is 130 mm at a 90° angle and 90 mm at 45°. These values allow cutting thick pieces of wood.
Can I use a blade of a different diameter?
It is recommended to use a 400 mm blade as specified. A different blade may affect safety and cutting quality.
How do I adjust the parallel guide?
The parallel guide is adjusted by loosening the lever, positioning it at the desired distance using the scale, then tightening it firmly. Check that it is parallel to the blade.
What is the diameter of the suction nozzle for connecting to a vacuum cleaner?
The suction nozzle has a diameter of 60 mm, which allows connecting a chip vacuum to maintain a clean working environment.
How do I maintain the saw to extend its lifespan?
Clean the table and housing after each use, regularly check the condition of the blade, belts, and electrical connections. Lubricate the moving parts according to the instructions in the manual.
What should I do if the saw does not start?
First check the power supply, the cable, and the outlet. Make sure the blade guard is properly lowered and that the emergency stop button is not engaged. If the problem persists, consult a professional.
What safety precautions should be followed?
Always wear safety glasses and hearing protection, use a push stick for short pieces, and never remove the blade guard. Keep your hands away from the cutting area.
Where can I find spare parts for my Deco 402 saw?
Spare parts for the Scheppach Deco 402 are available from Scheppach after-sales service or on the official website. Always provide the machine reference to get the exact part.
User questions about Deco 402 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual Deco 402 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Deco 402 by SCHEPPACH.
USER MANUAL Deco 402 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : Deco 402
Category : Saw