DB2000 - Uncategorized SCHEPPACH - Free user manual and instructions
Find the device manual for free DB2000 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | SCHEPPACH |
| Model | DB2000 |
| Product type | Drill press |
| Supply voltage | 230 V / 50 Hz |
| Motor power | 550 W |
| Rotation speed | 250 – 3000 rpm |
| Drilling capacity (wood) | 40 mm |
| Drilling capacity (steel) | 16 mm |
| Chuck | Keyed chuck 16 mm |
| Chuck travel | 80 mm |
| Table dimensions | 200 x 200 mm |
| Total height | 800 mm |
| Net weight | 35 kg |
| Depth stop | Precise and adjustable |
| Table tilt | -45° to +45° |
| Safety switch | With emergency stop |
| Chuck guard | Transparent cover |
| Cleaning | Dry non-abrasive cloth |
| Lubrication | Oil for woodworking tools |
| Spare parts | Available from after-sales service |
| Warranty | 2 years |
Frequently Asked Questions - DB2000 SCHEPPACH
How do I change the rotation speed?
To change the speed, unplug the machine, open the side cover and move the belt on the different pulleys. Refer to the speed correspondence table indicated on the cover.
How to adjust the depth stop?
Loosen the stop nut, place the drill bit at the desired depth, then tighten the nut. Test on a scrap piece to verify the setting.
How to replace the chuck?
Unscrew the inner screw of the chuck (left-handed), then use an extractor to remove the tapered shaft. Install the new chuck by pushing it firmly onto the spindle.
What to do if the drill does not start?
First check the power outlet, the power cable and the switch. If everything seems correct, the problem is probably from the motor or the capacitor: call a professional.
How to clean the drill press?
Unplug the machine before any cleaning. Use a dry or slightly damp cloth to remove dust. Never use aggressive solvents or a high-pressure cleaner.
Which oil to use for lubrication?
Use a fine lubricating oil for machine tools. Apply a drop to the moving parts such as the columns and gears, but avoid the belts.
How to adjust the perpendicularity of the table?
Place a square between the drill bit and the table. Loosen the locking handle, adjust the table angle until it is at a right angle, then tighten firmly.
What safety precautions should be taken?
Always wear safety goggles and do not wear loose clothing. Securely fasten the workpiece and never use gloves when rotating. Stop the machine for any adjustment.
How to drill metal?
Use a metal drill bit, reduce the speed and apply a coolant (cutting oil). Mark the location with a center punch and hold the piece with a vise.
Where to find spare parts?
Spare parts are available from SCHEPPACH after-sales service. Indicate the model DB2000 and the serial number of your device to get the correct reference.
User questions about DB2000 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DB2000 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DB2000 by SCHEPPACH.
USER MANUAL DB2000 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : DB2000
Category : Uncategorized