DJS200Z - Uncategorized MAKITA - Free user manual and instructions
Find the device manual for free DJS200Z MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless jigsaw |
| Brand | Makita |
| Model | DJS200Z |
| Power source | 18 V LXT lithium-ion battery (sold separately) |
| Battery type | Makita LXT 18 V |
| No-load speed | 0 to 2,600 strokes/min |
| Stroke | 23 mm |
| Wood cutting capacity | Up to 135 mm |
| Steel cutting capacity | Up to 10 mm |
| Aluminum cutting capacity | Up to 20 mm |
| Sole plate tilt | From -45° to +45° for bevel cuts |
| Blade change | Tool-less, with integrated hex key |
| Dust blower | Yes, adjustable |
| Dust extraction connector | Yes, for external vacuum |
| Lighting | Built-in LED light |
| Handle | Ergonomic with rubber insert |
| Anti-vibration system | Yes, with counterweight |
| Weight | Approximately 2.1 kg (without battery) |
| Dimensions (L x W x H) | Approximately 261 x 77 x 202 mm |
| Safety | Two-hand safety switch, protection against accidental restarts |
| Maintenance | Clean the blades and sole plate after use, lubricate moving parts |
| Repairability | Spare parts available from authorized dealers |
Frequently Asked Questions - DJS200Z MAKITA
How to change the blade?
To change the blade, turn the locking ring counterclockwise, insert the blade until it stops, then release the ring. The blade is locked without tools.
How to adjust the tilt for a bevel cut?
Loosen the sole plate screw, set the desired angle from -45° to +45° using the scale, then retighten the screw.
What battery should I use?
This jigsaw uses Makita LXT 18 V batteries. Batteries of different capacities (2 Ah, 3 Ah, 5 Ah, etc.) are compatible.
Is the jigsaw delivered with a battery and charger?
No, the DJS200Z model is sold as tool only (without battery or charger). You must purchase them separately if you do not already own the LXT system.
How to connect a vacuum cleaner?
Connect the vacuum hose to the nozzle provided for this purpose, located at the rear of the machine. The dust extraction function is then operational.
How to avoid wood splintering?
Use a blade suitable for wood, adjust the speed, and install the sole plate guard if available. A slower speed reduces splintering.
What speed to choose for which material?
For wood, use a high speed; for metal, a low speed. The speed is infinitely adjustable from 0 to 2,600 strokes/min depending on the material.
How to maintain the jigsaw?
After each use, dust off the sole plate, the locking ring, and the ventilation grilles. Regularly lubricate the moving parts with a suitable product.
What safety precautions should be taken?
Wear protective goggles and a dust mask. Make sure the workpiece is firmly secured. Use the safety switch to prevent accidental start-up.
How to activate the dust blower?
The dust blower is adjustable: operate the dial on the top of the machine to direct the airflow toward the cutting line to remove sawdust.
User questions about DJS200Z MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DJS200Z - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DJS200Z by MAKITA.
USER MANUAL DJS200Z MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : DJS200Z
Category : Uncategorized