SBS-PH-100 - Measurement STEINBERG - Free user manual and instructions
Find the device manual for free SBS-PH-100 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable pH meter |
| Brand | STEINBERG |
| Model | SBS-PH-100 |
| Category | Measuring instrument |
| Measured parameters | pH and temperature |
| pH range | 0.00 to 14.00 pH |
| pH resolution | 0.01 pH |
| pH accuracy | ±0.05 pH |
| Temperature range | 0 to 50 °C |
| Temperature resolution | 0.1 °C |
| Temperature accuracy | ±0.5 °C |
| Temperature compensation | Automatic |
| Calibration | Up to 3 points (pH 4.00, 6.86, 9.18) |
| Display | Backlit LCD |
| Power supply | 2 AAA batteries (DC 3V) |
| Battery life | Approximately 200 hours |
| Auto-off | After 8 minutes |
| Dimensions | 185 × 40 × 45 mm |
| Weight | 142 g (with batteries) |
| Main features | pH measurement, temperature measurement, multi-point calibration, battery indicator |
| Maintenance and cleaning | Rinse the probe with distilled water, store in a storage solution |
| Safety | Do not immerse the housing, avoid impacts |
| Spare parts and repairability | Replacement electrode available |
| Box contents | pH meter, probe, protective cap, buffer solutions, manual |
| General information | Manufacturer's warranty and technical support |
Frequently Asked Questions - SBS-PH-100 STEINBERG
How to calibrate the SBS-PH-100 pH meter?
To calibrate your pH meter, prepare buffer solutions (pH 4.00, 6.86, 9.18). Immerse the probe in the first solution and press the CAL button until the symbol flashes. Wait for stabilization, then confirm. Repeat for the other solutions. A 2 or 3-point calibration is recommended for better accuracy.
How to replace the batteries of the STEINBERG SBS-PH-100?
Open the battery compartment located on the back of the housing. Remove the old batteries and install two new AAA batteries respecting the polarity. Close the cover. The battery indicator on the display should show a sufficient level.
What is the difference between automatic and manual temperature compensation?
Automatic compensation uses a built-in temperature probe to correct the measurement according to the sample temperature. Manual compensation requires manually entering the temperature. The SBS-PH-100 offers automatic compensation for more convenience and precision.
How to store the probe when the device is not in use?
To extend the life of the electrode, rinse it with distilled water and place it in a cap containing a storage solution (KCl). Never let it dry out. The provided cap can be filled with storage solution.
What to do if the measurements seem unstable or incorrect?
Check that the probe is properly connected and cleaned. Perform a calibration with fresh buffer solutions. Make sure the sample temperature is stable. If the problem persists, replace the electrode.
Is the pH meter waterproof?
The housing is designed to resist splashes but is not submersible. Keep the electronic housing dry and only immerse the probe in the liquid. The protection rating is IP67 for the probe only.
How to clean the probe after measurements in viscous liquids?
Rinse the probe with distilled water or a mild cleaning solution. For stubborn deposits, use a soft brush. Then normalize the probe by soaking it in a regeneration solution for a few minutes.
What is the battery life of the SBS-PH-100?
With two quality AAA batteries, the battery life is approximately 200 hours of continuous use. The device automatically shuts off after 8 minutes of inactivity to save the batteries.
Can I use this pH meter to measure soil pH?
Yes, but you need to prepare a soil sample by mixing it with distilled water. Immerse the probe in the supernatant. The SBS-PH-100 is suitable for measurements in agriculture, aquariums, and laboratories.
How to know if the electrode needs to be replaced?
Replacement is necessary if the measurements become slow to stabilize, if the calibration slope is less than 90%, or if physical damage is visible on the glass membrane. A new electrode is available as a spare part.
User questions about SBS-PH-100 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual SBS-PH-100 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-PH-100 by STEINBERG.
USER MANUAL SBS-PH-100 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-PH-100
Category : Measurement