SBS-BT-918 - Measurement STEINBERG - Free user manual and instructions
Find the device manual for free SBS-BT-918 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Bluetooth laser distance meter |
| Brand | STEINBERG |
| Model | SBS-BT-918 |
| Category | Measuring instrument |
| Dimensions (L x W x H) | 115 x 50 x 28 mm |
| Weight | 90 g |
| Power supply | 2 AAA batteries (1.5 V) |
| Battery life | Approximately 5000 measurements per set of batteries |
| Display | Backlit LCD |
| Measuring range | 0.05 to 40 m |
| Accuracy | ±2 mm |
| Connection | Bluetooth 4.0 |
| Mobile apps | Compatible with iOS and Android |
| Main functions | Distance measurement, area, volume, indirect measurement (Pythagoras), addition/subtraction |
| Units of measurement | m / ft / in |
| Memory | Last 20 measurements |
| Protection rating | IP54 (protected against dust and splashes) |
| Laser class | Class II, power <1 mW, wavelength 630-670 nm |
| Operating temperature | -10°C to 50°C |
| Maintenance and cleaning | Clean with a soft, dry cloth; do not use solvents or abrasive cleaners |
| Safety | Do not look directly into the laser beam; keep out of reach of children |
| Spare parts and repairability | Device not user-repairable; contact authorized after-sales service |
| General information | 2-year warranty |
Frequently Asked Questions - SBS-BT-918 STEINBERG
How do I measure a distance with the SBS-BT-918?
Place the device against the starting point, turn it on, and press the measure button. The laser beam aims at the target and the distance is displayed immediately on the screen.
How do I change the batteries of the distance meter?
Open the compartment on the back of the device, remove the old batteries, and insert two new AAA batteries, respecting the polarities (+/-). Close the compartment carefully.
The distance meter does not turn on, what should I do?
Check that the batteries are installed correctly and not discharged. If the problem persists, remove the batteries, wait a minute, then reinsert them. If it still fails, contact after-sales service.
How do I use the area measurement function?
Select the area mode using the function button. Measure the length, then the width. The calculated area is displayed automatically in square meters.
Are the measurements accurate?
Yes, the SBS-BT-918 offers an accuracy of ±2 mm on distances up to 40 m, under normal usage conditions and on a suitable target.
How do I connect the device to a smartphone?
Enable Bluetooth on your phone, open the compatible app, then press the Bluetooth button on the distance meter. Follow the instructions to pair the devices.
What does error E01 mean?
Error E01 indicates a measurement problem, often due to a target that is too close, too reflective, or an interrupted beam. Check the measurement area and try again.
How do I clean the device?
Use a soft, dry cloth to wipe the housing and the laser window. Never use solvents, chemicals, or abrasive cleaners.
Is the laser dangerous?
The laser is Class II and its power is below 1 mW. It is safe for occasional use, but avoid looking directly into the beam or pointing it at eyes.
Can I measure in bright sunlight?
Yes, but the range and accuracy may be reduced in bright sunlight or on highly reflective surfaces. Use a target or reflective plate if necessary.
User questions about SBS-BT-918 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual SBS-BT-918 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-BT-918 by STEINBERG.
USER MANUAL SBS-BT-918 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-BT-918
Category : Measurement