STERLING CHIM 90PYR - Range hood STOVES - Free user manual and instructions
Find the device manual for free STERLING CHIM 90PYR STOVES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Extractor hood |
| Brand | STOVES |
| Model | STERLING CHIM 90PYR |
| Width | 90 cm |
| Installation type | Wall-mounted chimney, ducted or recirculating |
| Finish | Brushed stainless steel |
| Speeds | 3 speeds + intensive mode |
| Control type | Electronic push buttons |
| Lighting | 2 LED bulbs of 3 W |
| Maximum air flow | 580 m³/h |
| Maximum noise level | 65 dB(A) at intensive speed |
| Filter type | Washable aluminium grease filters |
| Dimensions (H x W x D) | 60-110 cm x 90 cm x 45 cm |
| Net weight | 14.5 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Total power | 250 W |
| Maintenance | Regular cleaning of filters and surfaces |
| Safety | Compliant with CE standards |
| Spare parts | Filters, bulbs, circuits available |
| General information | 2-year warranty, European manufacture |
Frequently Asked Questions - STERLING CHIM 90PYR STOVES
How to install the STERLING CHIM 90PYR extractor hood?
Installation must be carried out by a professional. Keep a minimum distance of 65 cm above an electric hob and 75 cm above a gas hob. Follow the wall mounting and connection instructions provided in the manual.
How do I clean the grease filters?
Remove the aluminium grease filters and wash them by hand with warm soapy water or in the dishwasher on a low temperature. Allow them to dry completely before putting them back. Do this at least once a month or more often with heavy use.
Can the hood be used in recirculation mode?
Yes, the hood can operate in extraction or recirculation mode. In recirculation mode, install activated charcoal filters (not supplied) to neutralise odours.
What should I do if the hood does not work?
Check that the hood is plugged in and that the power supply circuit is not tripped. If it has an automatic shutdown, make sure it has not been activated. If the problem persists, contact STOVES after-sales service.
How do I replace the LED lighting?
Switch off the hood's power supply. Unclip the LED block with a small flat-head screwdriver, unplug the connector and replace it with an identical LED module (3 W). Clip it back and restore the power supply.
What is the maximum filtering area?
With a maximum flow rate of 580 m³/h, the hood is suitable for kitchens up to about 20 m². This flow rate provides effective ventilation for normal cooking.
Is the noise level high?
On normal speed, the noise level is around 52 dB(A). On intensive speed, it reaches 65 dB(A). To limit noise, prefer the lower speeds.
Can I install the hood myself?
Installation requires electrical and DIY skills. If you are not sure, call a professional. The hood must be securely fixed to the wall and connected according to local regulations.
How do I maintain the stainless steel exterior?
Use a soft, slightly damp cloth with a suitable stainless steel cleaner. Wipe with a dry cloth to avoid marks. Never use abrasive pads or bleach.
Where can I find spare parts?
Spare parts are available from the approved STOVES after-sales service or from your dealer. Order parts by providing the model STERLING CHIM 90PYR.
User questions about STERLING CHIM 90PYR STOVES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual STERLING CHIM 90PYR - STOVES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STERLING CHIM 90PYR by STOVES.
USER MANUAL STERLING CHIM 90PYR STOVES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STOVES
Model : STERLING CHIM 90PYR
Category : Range hood