MSM466 - Access Point HP - Free user manual and instructions
Find the device manual for free MSM466 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | HP |
| Model | MSM466 |
| Wireless Standard | IEEE 802.11a/b/g/n |
| Frequency Band | Dual-band (2.4 GHz and 5 GHz) |
| MIMO | 3x3 MIMO with up to 450 Mbps per radio |
| Ethernet Ports | 1 x Gigabit Ethernet (10/100/1000Base-T) with PoE |
| Power Supply | 802.3af/at Power over Ethernet (PoE) or optional DC adapter |
| Management | Controller-based or standalone via web interface |
| Security Features | WPA/WPA2-Enterprise, 802.1X, MAC filtering |
| Mounting | Ceiling or wall mountable (brackets included) |
| Dimensions | Approximately 145 x 45 x 200 mm (5.7 x 1.8 x 7.9 in) |
| Weight | Approximately 600 g (1.3 lb) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% (non-condensing) |
| Maintenance | Keep fresh air vents unobstructed; clean casing with dry cloth |
| Safety | Complies with FCC, CE, and other regulatory standards |
| Spare Parts | Non-user-serviceable; contact HP support for replacement |
| Repairability | Repairs should be performed by qualified technicians only |
| General Information | Part of the HP ProCurve/Networking series; supports multiple SSIDs |
| Included Accessories | Mounting bracket, installation guide, safety/regulatory flyer |
Frequently Asked Questions - MSM466 HP
What is the HP MSM466?
The HP MSM466 is a dual-radio 802.11n access point designed for high-density wireless networks, offering up to 450 Mbps per radio with 3x3 MIMO technology.
Does the MSM466 support Power over Ethernet?
Yes, it supports IEEE 802.3af/at PoE, allowing you to power the device through the standard Ethernet cable without a separate power adapter.
Can I use the MSM466 without a wireless controller?
Yes, it can operate in standalone (autonomous) mode via its web interface, or be managed centrally by an HP wireless controller.
What security protocols does it support?
It supports WPA/WPA2 (PSK and Enterprise), IEEE 802.1X authentication, and MAC address filtering for secure access.
How many SSIDs can I configure?
The MSM466 supports multiple SSIDs (typically up to 16) with separate security and VLAN assignments.
What type of antennas does it use?
It uses internal 3x3 MIMO antennas, so no external antennas are required for installation.
Is the device suitable for outdoor use?
No, the MSM466 is designed for indoor use only, with an operating temperature range of 0°C to 40°C.
How do I reset the access point to factory defaults?
Press and hold the reset button on the device for about 10 seconds until the LED blinks, then release.
Can I mount it on a wall?
Yes, it comes with a mounting bracket that supports ceiling or wall mounting.
What should I do if the device overheats?
Ensure the vents are clean and unobstructed, check ambient temperature, and contact HP support if issues persist.
User questions about MSM466 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual MSM466 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MSM466 by HP.
USER MANUAL MSM466 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : MSM466
Category : Access Point