ProLiant DL385 G10 Plus - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL385 G10 Plus HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Brand | HP (Hewlett Packard Enterprise) |
| Model | ProLiant DL385 G10 Plus |
| Form Factor | 2U rack mount |
| Processor | Up to two AMD EPYC 7002/7003 series (64 cores per CPU) |
| Memory | Up to 4 TB DDR4-3200 ECC SDRAM, 32 DIMM slots |
| Drive Bays | Up to 24 SFF hot-plug SAS/SATA/NVMe |
| Expansion Slots | Up to 8 PCIe 4.0 x16 low-profile slots |
| Power Supply | Dual hot-plug redundant PSUs, up to 1600 W |
| Cooling | Redundant hot-plug fans |
| Networking | Embedded HPE FlexLOM 1GbE or 10GbE controller |
| Remote Management | HPE iLO 5 with Intelligent Provisioning |
| Security Features | UEFI Secure Boot, TPM 2.0, Secure Shell, intrusion detection |
| Dimensions (H x W x D) | 8.73 cm x 44.55 cm x 70.50 cm |
| Weight | Maximum 28.8 kg (63.5 lbs) |
| Operating Temperature | 10°C to 35°C |
| Maintenance | Hot-swappable drives, fans, and power supplies; tool-less cover access |
| Cleaning Care | Power off, unplug, use compressed air; no liquids or vacuum |
| Repairability | Modular design for easy replacement; replacement guides available |
| Warranty | Standard 3-year limited warranty (optional extensions) |
Frequently Asked Questions - ProLiant DL385 G10 Plus HP
How do I access the remote management console on the ProLiant DL385 G10 Plus?
Use HPE iLO 5. Connect a network cable to the dedicated iLO port and enter the iLO IP address in a web browser. The default login credentials are printed on the pull-out tag on the front of the server. iLO provides remote console, virtual media, and power management.
How can I update the system BIOS and firmware?
Download the latest firmware from the HPE Support Center. Use HPE Smart Update Manager (SUM) to update all components. Alternatively, for BIOS, boot into the UEFI setup and use the integrated flash tool. Always power up the server with stable power and do not interrupt the update process.
What RAID configurations are supported on this server?
The server supports HPE Smart Array controllers such as Mr408i-a Gen10 Plus. RAID levels 0, 1, 5, 6, 10, 50, and 60 are available. Configure arrays before installing an OS using Intelligent Provisioning (F10) or the controller BIOS utility.
How do I replace a failed hard drive in the hot-swap bay?
Locate the drive with an amber fault LED. Press the latch to release the carrier, pull the drive out, insert a new drive into the carrier, and push it back into the bay until it clicks. If the drive is part of a RAID array, the rebuild starts automatically. Check the HPE guide for exact bay numbers.
What type of memory does the DL385 G10 Plus support?
It uses DDR4-3200 ECC SDRAM, available as Registered DIMMs (RDIMMs) or Load Reduced DIMMs (LRDIMMs). Populate slots in alphabetical order and follow HPE's memory population guidelines. Use only HPE-qualified memory to ensure compatibility.
How can I reset the iLO administrator password?
If the password is lost, power off the server and use the iLO Security Override switch on the system board. Hold it for a few seconds, then power on. iLO resets to factory defaults, displayed on the pull-out tag. Reconfigure your iLO settings afterward.
Which operating systems are compatible with this server?
Supported operating systems include Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi, and Ubuntu. Always check the HPE Software Support Matrix for the latest OS versions and driver downloads.
How do I perform first-time setup and installation?
Connect power, network, and a monitor/keyboard. Boot the server and press F10 to enter Intelligent Provisioning. From there you can configure RAID, install an OS from an ISO, and update firmware. For remote setup, use iLO or HPE OneView.
What is the proper way to clean the server internally?
Power off the server and disconnect all cables. Use compressed air to blow dust from fans, heatsinks, and the motherboard. Do not use a vacuum cleaner, which can generate static. Handle components with an anti-static wrist strap and avoid touching contacts.
How do I secure the server against unauthorized physical and electronic access?
Enable UEFI Secure Boot, set BIOS and iLO passwords, and use TPM 2.0 for disk encryption. Turn on chassis intrusion detection and restrict physical access to the server. Keep firmware up to date and consider using HPE Secure Encryption for web access.
User questions about ProLiant DL385 G10 Plus HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL385 G10 Plus - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL385 G10 Plus by HP.
USER MANUAL ProLiant DL385 G10 Plus HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProLiant DL385 G10 Plus
Category : Server