ProLiant DL360p G8 - Server HP - Free user manual and instructions

Find the device manual for free ProLiant DL360p G8 HP in PDF.

HP ProLiant DL360p G8 - Server
📄 134 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HP ProLiant DL360p G8 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Rack Server
Brand HP
Model ProLiant DL360p G8
Form Factor 1U rack
Processor Type Intel Xeon E5-2600 series
Number of Processors Up to 2 (dual-socket)
Chipset Intel C600 series
Memory Slots 16 DIMM slots
Maximum Memory Up to 512 GB DDR3 LRDIMM
Internal Storage Up to 8 SFF hot-plug SAS/SATA or 4 LFF hot-plug
Network Controller 4 x 1GbE embedded
Power Supply Dual redundant hot-plug 750W
Management Integrated HP iLO4
Expansion Slots Up to 6 PCIe 3.0
Security Features TPM, Secure Boot
Dimensions (W x D x H) 43.2 cm x 73.4 cm x 4.3 cm
Weight Approximately 14.5 kg
Cooling Active redundant fans
Cleaning Instructions Use a dry, lint-free cloth; avoid liquid cleaners
Maintenance Tool-less access to internal components
Spare Parts and Repairability Common parts like DIMMs, drives, PSUs, fans are replaceable; designed for quick service
General Information Enterprise-grade server for data center environments

Frequently Asked Questions - ProLiant DL360p G8 HP

How to power on the ProLiant DL360p G8?
Press the power button on the front panel. Ensure the power cables are connected and the PSUs are in place. The server will initialize and begin POST. You can also power on remotely via the iLO management interface.
How to access the iLO management console?
Connect to the iLO Ethernet port and navigate to the dedicated IP address in a web browser. Default credentials are typically printed on a label on the server. Once logged in, you can monitor hardware, configure settings, and mount virtual media.
How to reset the iLO administrator password?
If the password is lost, you can reset it by pressing the iLO reset button on the system board for at least 5 seconds while the server is in standby. Alternatively, use the iLO Virtual NVRAM to clear configuration. Refer to the user manual for detailed steps.
How to configure RAID on the DL360p G8?
Enter the Option ROM Configuration for Arrays (ORCA) during boot by pressing F8. Create logical drives, set RAID levels (0, 1, 5, 10), and assign spares as needed. The embedded Smart Array controller manages the array.
How to install additional memory?
Remove the access panel, locate the DIMM slots, and insert DDR3 DIMMs following the population order printed on the motherboard. Ensure the server is powered off and discharged. After installation, the system should recognize the new memory during POST.
How to replace a failed power supply?
The PSUs are hot-pluggable. Slide the release latch, disconnect the power cord, and pull the PSU out. Push the replacement PSU into the bay until it clicks, reconnect the power cord, and verify the LED indicates healthy operation.
How to update the server firmware?
Download the latest HP Service Pack for ProLiant (SPP) from the HP website. Run the SPP ISO via iLO virtual media or a bootable USB. The tool automatically detects and updates the BIOS, iLO, and controller firmware.
How to identify the status LEDs on the front panel?
The front panel includes LEDs for power, health, network, and activity. A solid green LED indicates normal operation, while an amber or red blinking LED signals a fault. Check the iLO logs for detailed components causing the alert.
How to clean the server properly?
Use a dry, lint-free cloth to wipe the exterior and vents. Do not use liquid cleaners or compressed air directly on components. Clean dust filters regularly and ensure airflow is not blocked. For internal cleaning, use low-pressure air carefully.
How to ensure proper ventilation and cooling?
Verify all fan modules are installed and spinning. Keep at least 6 inches of clearance in front and back for airflow. Install servers in a properly ventilated rack and monitor temperatures via iLO to avoid overheating.

User questions about ProLiant DL360p G8 HP

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL360p G8 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL360p G8 by HP.

USER MANUAL ProLiant DL360p G8 HP

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HP

Model : ProLiant DL360p G8

Category : Server