ProLiant DL360 G10 - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL360 G10 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Form Factor | 1U |
| Processor Model | Intel Xeon Scalable (2nd Gen) |
| Socket Count | 2 |
| Memory Slots | 24 DIMM |
| Memory Type | DDR4 ECC |
| Storage Bays | Up to 24 SFF / 12 LFF |
| Storage Controller | HPE Smart Array S100i |
| Networking | 4x 1GbE embedded |
| Management | HPE iLO5 |
| Expansion Slots | 3 PCIe 3.0 |
| Power Supply | Redundant hot-plug, 800W |
| Cooling | 8x redundant fans |
| Dimensions (H x W x D) | 4.29 x 43.46 x 70.61 cm |
| Weight | 14.5 kg |
| Security Features | TPM 2.0, Secure Boot |
| Maintenance | Tool-less access, front diagnostics |
| Repairability | Hot-swappable drives and fans |
| General Information | HPE ProLiant Gen10 architecture |
Frequently Asked Questions - ProLiant DL360 G10 HP
How to reset the HPE iLO5 password?
To reset the iLO password, boot the server and press F9 to enter UEFI, then select iLO5 configuration to set a new password.
How to update firmware on the ProLiant DL360 G10?
Use HPE Intelligent Provisioning or the HPE Service Pack for ProLiant (SPP) to update firmware components like BIOS, iLO, and controllers.
Which operating systems are supported?
The DL360 G10 supports major Windows Server, Red Hat Enterprise Linux, VMware ESXi, and other certified OS distributions. Check the HPE support matrix for exact versions.
How to access the BIOS/UEFI settings?
Press F9 during POST to enter UEFI, or use iLO Virtual Keyboard to access the system configuration.
How to configure RAID on this server?
Boot into HPE Intelligent Provisioning and use the Array Configuration Utility to create logical drives. Alternatively, use iLO or BIOS setup if a controller is present.
How to replace a failed power supply unit?
The PSUs are hot-pluggable. Identify the faulty unit by the amber LED, then press the release latch and slide it out. Install the new PSU firmly until it clicks.
How to monitor server health?
Use HPE iLO5 web interface or HPE OneView to monitor temperature, fan status, power consumption, and component health in real time.
How to install hard drives in the chassis?
Remove the front drive blank, insert the hot-plug drive into the bay with the handle open, then close the handle to seat the drive. The LED will indicate activity.
How to troubleshoot boot failure?
Check POST error codes on the screen, review iLO event logs, and verify that memory and power supplies are seated correctly. Use HPE Insight Diagnostics for further analysis.
How to use the remote console feature?
Log into iLO5, launch the Remote Console to view the server screen and control it remotely via Virtual Keyboard and Virtual Media.
User questions about ProLiant DL360 G10 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL360 G10 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL360 G10 by HP.
USER MANUAL ProLiant DL360 G10 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProLiant DL360 G10
Category : Server