SMD 101 - Digital decoder Extron - Free user manual and instructions
Find the device manual for free SMD 101 Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Streaming Media Decoder |
| Brand | Extron |
| Model | SMD 101 |
| Video Decoding Formats | H.264, MPEG-4, up to 1080p60 |
| Video Output | 1 x HDMI |
| Audio Output | Analog stereo, HDMI embedded audio |
| Network Interface | RJ-45, 10/100/1000 Mbps |
| Network Protocols | HTTP, RTSP, RTP, UDP, IGMP, etc. |
| Control Interface | RS-232, Ethernet (Telnet/SSH), Web UI |
| Power Supply | 12V DC, 15W, external |
| Dimensions (H x W x D) | 1.0" x 8.7" x 6.0" (2.5 cm x 22.1 cm x 15.2 cm) |
| Weight | 0.55 lbs (0.25 kg) |
| Mounting | Tabletop or rack-mountable with optional kit |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Maintenance | Keep air vents clear; wipe with soft dry cloth |
| Security Features | Password protection for web interface; secure network connection |
| Repair / Parts | No user-serviceable parts; contact Extron for service |
| Regulatory Compliance | CE, UL, FCC Class A |
| Warranty | Extron 3-year parts and labor warranty |
Frequently Asked Questions - SMD 101 Extron
How do I connect the SMD 101 to my network?
Connect an Ethernet cable from the RJ-45 port to your network switch. The device will automatically obtain an IP address via DHCP, or you can assign a static IP through the web interface. Ensure the network supports multicast if streaming over multicast.
What video formats does the SMD 101 support?
The SMD 101 supports H.264 and MPEG-4 video streams with resolutions up to 1080p60. It can decode multiple streaming protocols such as RTSP and HTTP.
How do I update the firmware on the SMD 101?
Download the latest firmware from the Extron website. Connect via the web interface, go to firmware update, and upload the file. The device will reboot automatically. Ensure you do not power off during the update.
Can the SMD 101 decode multiple streams simultaneously?
The SMD 101 is designed to decode one stream at a time. For multi-viewer applications, consider using the Extron DMP 128 or a similar product with multi-window processing.
How can I control the SMD 101 via RS-232?
Connect a serial cable to the RS-232 port. Use simple ASCII commands sent at 9600 baud, 8 data bits, no parity, 1 stop bit. The full command set is in the user manual.
What do the LEDs on the front panel indicate?
The Power LED indicates DC power is present. The Link LED shows network link activity. The Signal LED lights when a valid stream is being decoded. Refer to the manual for detailed LED behavior.
How do I perform a factory reset?
Reset the device by holding the recessed Reset button for 5 seconds. This restores factory defaults, including IP settings. You can also reset via the web interface if you can access it.
What is the maximum resolution and refresh rate supported?
Up to 1080p60 (1920x1080 at 60Hz). The output resolution is set to match the streamed video resolution automatically.
Why is there no video output on my display?
Check that the network connection is active, the stream URL is correct, and the encoder is sending a compatible format. Verify the HDMI cable is connected and the display is set to the correct input. Also, try a lower resolution stream.
Is the SMD 101 compatible with third-party encoders?
Yes, the SMD 101 works with any H.264 or MPEG-4 encoder that streams via RTSP, RTP, or HTTP. It is widely used with IP cameras and soft encoders.
User questions about SMD 101 Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Digital decoder in PDF format for free! Find your manual SMD 101 - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMD 101 by Extron.