DBGL7730CN - Range hood ELECTROLUX - Free user manual and instructions
Find the device manual for free DBGL7730CN ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Decorative wall-mounted range hood |
| Brand | Electrolux |
| Model | DBGL7730CN |
| Width | 90 cm |
| Height | 60 to 110 cm (telescopic chimney) |
| Evacuation diameter | 150 mm with 120 mm reducer supplied |
| Control type | Electronic push buttons |
| Number of speeds | 3 speeds + intensive position |
| Maximum air flow | 680 m³/h |
| Maximum noise level | 65 dB(A) approximately |
| Lighting | 2 x LED 3 W |
| Filters | 2 washable aluminum mesh filters |
| Motor | 1 silent motor |
| Power supply | 220-240 V, 50 Hz |
| Total power | 280 W (motor + lighting) |
| Energy class | B |
| Maintenance and cleaning | Dishwasher-safe filters, stainless steel surface cleanable with a soft cloth |
| Safety | Complies with CE standards, thermal safety switch |
| Spare parts and repairability | Filters, LED bulbs, control, and motor available |
| General information | Evacuation and recirculation function, wall-mounted installation |
Frequently Asked Questions - DBGL7730CN ELECTROLUX
How to install the DBGL7730CN hood?
Installation must respect a minimum distance of 65 cm between the cooking surface and the lower part of the hood. Securely fix the wall bracket, connect the exhaust duct (Ø 150 mm) and connect the appliance to the 220-240 V supply. For recirculation mode, add an activated carbon filter.
How to clean the grease filters?
The aluminum mesh filters are removed by pushing the tab. Wash them by hand with hot water and detergent or in the dishwasher at low temperature. Replace them completely dry to avoid oxidation.
What type of bulb should be used for the lighting?
The hood is equipped with integrated LEDs (2 x 3 W). To replace them, contact Electrolux after-sales service or use exclusively LED bulbs of the same type, so as not to damage the electronic circuit.
How to switch to recirculation mode?
If your installation does not allow external evacuation, install an activated carbon filter (optional) in addition to the grease filters. The air flow is then filtered and returned to the room. Remember to replace the charcoal every 3 to 6 months.
Why is the hood noisy?
Abnormal noise can come from a poorly fixed filter, a build-up of grease, or an obstruction in the duct. Check that the filters are clean and properly clipped. If the noise persists, the motor must be checked by a professional.
Can the motor be replaced?
Yes, the motor is a spare part available from Electrolux approved centers. Replacement requires removing the hood and unplugging the power supply. It is recommended to call a qualified technician.
How to adjust the extraction speed?
Use the push buttons on the front. The intensive position allows maximum flow for strong odors. After a few minutes, switch back to a normal speed to limit noise and energy consumption.
Is it suitable for a central island?
No, this model is designed for wall mounting. For an island, you need a special island hood with ceiling support and particular finishes.
How to maintain the stainless steel surface?
Clean with a soft cloth dampened with soapy water or a special stainless steel cleaner. Wipe in the direction of the stainless steel grain. Avoid abrasive sponges that scratch the surface.
Where to find spare parts?
Spare parts (filters, LEDs, control, motor) are available on the Electrolux online store or from approved retailers. Always indicate the model DBGL7730CN and the serial number.
User questions about DBGL7730CN ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual DBGL7730CN - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBGL7730CN by ELECTROLUX.