FAB28RX1 - Refrigerator SMEG - Free user manual and instructions
Find the device manual for free FAB28RX1 SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Refrigerator |
| Brand | SMEG |
| Model | FAB28RX1 |
| Design | Retro-style with rounded edges and chrome handles |
| Total Capacity | 280 liters |
| Fridge Capacity | 195 liters |
| Freezer Capacity | 85 liters |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 260 kWh per year |
| Noise Level | 38 dB |
| Climate Class | SN-N-ST |
| Dimensions (H x W x D) | 1680 x 600 x 655 mm |
| Weight | 68 kg |
| Power Supply | 220-240 V, 50 Hz |
| Temperature Control | Mechanical thermostat with rotary dial |
| Defrost | Manual defrost for both fridge and freezer compartments |
| Shelves | 4 adjustable glass shelves in the fridge |
| Door Balconies | 3 door balconies for bottles and jars |
| Interior Light | LED interior light |
| Adjustable Feet | Yes, for levelling |
| Reversible Door | Yes, door can be hinged on either side |
| Maintenance | Clean interior with a soft damp cloth; vacuum dust off condenser coils |
| Safety Features | Safety glass shelves, stable construction, and harmonised components |
| Spare Parts Availability | Genuine spare parts available for at least 10 years after purchase |
| General Information | Includes user manual and instructions for installation, use, and troubleshooting |
Frequently Asked Questions - FAB28RX1 SMEG
How do I set the temperature on my SMEG FAB28RX1?
To set the temperature, locate the thermostat dial inside the fridge compartment. Turn it to a higher number for colder temperatures (e.g., 3-4 is typical). For energy savings, set it between 3 and 4 and adjust according to your needs. The freezer temperature is automatically controlled based on the dial setting.
How do I defrost the freezer?
To defrost the freezer, first remove all food and turn off the appliance. Leave the freezer door open to allow ice to melt naturally. Place towels or a tray to catch water. After defrosting, clean the interior and dry it thoroughly before switching the appliance back on. Do not use sharp tools to remove ice.
How do I clean the refrigerator?
Clean the interior with a soft cloth dipped in warm water with a mild detergent. Wipe the door gaskets, shelves, and balconies regularly. Avoid abrasive cleaners or solvents. For the exterior, use a damp cloth and dry with a soft cloth to prevent streaks. Always unplug the appliance before cleaning.
The fridge is not cooling properly. What can I check?
First check if the appliance is properly plugged in and the power is on. Ensure the thermostat is set to a suitable position and the door is closed fully. Check that the condenser coils at the back are free of dust and not blocked. Also, avoid overloading the fridge or placing hot food inside. If the issue persists, contact technical support.
Can I reverse the door opening direction?
Yes, the door of the SMEG FAB28RX1 is reversible. To change the door swing, you will need a screwdriver. Follow the instructions in the user manual: remove the upper hinge, then the lower hinge, and reattach them on the opposite side. Take care to reposition the gasket properly to maintain a good seal.
What is the recommended temperature for the fridge and freezer?
For optimal food preservation, set the fridge temperature to 4°C (39°F) and the freezer to -18°C (0°F). Use a thermometer to verify the actual temperatures, as the dial may not show exact values. Adjust the thermostat accordingly, especially in hot weather.
How long does it take to reach the set temperature after installation?
After installation, the refrigerator typically takes 2 to 4 hours to reach the optimal temperature. Avoid opening the door frequently during this period and do not store food until the desired temperature is reached. The freezer may take a bit longer, up to 24 hours.
Is it safe to use extension cords with this refrigerator?
It is not recommended to use extension cords, as they may cause voltage drops and lead to poor performance or potential fire hazards. Plug the refrigerator directly into a properly grounded wall outlet. If an extension cord is unavoidable, use a heavy-duty cord rated for at least 10 amps and keep it as short as possible.
What should I do if the interior light is not working?
If the interior LED light does not work, first check if the appliance is powered on and the door switch is functioning. The LED light may need replacement; contact a qualified technician or the SMEG service center for assistance. Do not attempt to replace the LED light yourself unless you are qualified.
How can I get spare parts or accessories?
Genuine spare parts and accessories are available from SMEG authorized service centers. Always quote the model number FAB28RX1 when ordering. You can also visit the SMEG website or contact their support for a list of available parts. For warranty-related requests, keep your purchase receipt handy.
User questions about FAB28RX1 SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual FAB28RX1 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FAB28RX1 by SMEG.
USER MANUAL FAB28RX1 SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : FAB28RX1
Category : Refrigerator