AMP204S - Audio Amplifier CABASSE - Free user manual and instructions
Find the device manual for free AMP204S CABASSE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Stereo audio amplifier |
| Brand | CABASSE |
| Model | AMP204S |
| Category | Audio amplifier |
| Dimensions (W x H x D) | 430 x 120 x 350 mm |
| Weight | 8 kg |
| Power supply | Mains 230 V / 50 Hz |
| Output power | 2 x 100 W at 8 ohms |
| Number of channels | 2 |
| Load impedance | 4 to 8 ohms |
| Frequency response | 20 Hz - 20 kHz |
| Signal-to-noise ratio | Greater than 90 dB |
| Total harmonic distortion | Less than 0.05 % |
| Analog inputs | 4 RCA line inputs, 1 MM phono input |
| Outputs | 2 pairs of speaker terminals, headphone output, preamp output |
| Main functions | Source selection, volume, balance, tone, remote control |
| Maintenance and cleaning | Unplug the device, clean with a soft, dry cloth |
| Safety | Do not expose to moisture, do not open the casing, use an earthed outlet |
| Spare parts and repairability | Consult an approved technician, spare parts available from the manufacturer |
| General information | Free user manual and instructions available online |
Frequently Asked Questions - AMP204S CABASSE
How do I connect the amplifier to my speakers?
Connect each speaker to its corresponding channel using the terminals on the front or rear. Respect the positive (+) and negative (-) polarities for optimal sound. Make sure the speaker impedance is compatible with the amplifier (4 to 8 ohms). Use quality cables suited to the connection length.
Can I connect a turntable?
Yes, the amplifier has an MM phono input (moving magnet). Connect the turntable to this input and check that the ground cable is connected if necessary. Some MC cartridge turntables require an additional preamplifier.
What to do if no sound comes out of the speakers?
First check that the amplifier is on and that the volume is not at minimum. Check the source and speaker connections. Make sure a source is selected. If the problem persists, test with another source or cable. Consult the troubleshooting section of the manual for more details.
How do I clean the amplifier?
Before any cleaning, unplug the device. Use a soft, dry cloth to dust the casing and buttons. Never use abrasive products or solvents. Do not let liquid get inside the device.
Is the remote control included?
Yes, the amplifier is supplied with a remote control for volume, source selection, and standby. If the remote does not work, check the batteries and the viewing angle.
Can I use the amplifier with a subwoofer?
Yes, if your subwoofer has a line-level input, you can connect it to the preamp output of the amplifier. If the subwoofer is passive, it requires a dedicated amplifier. The preamp output can also be used for a second amplifier.
What is the recommended maximum power for the speakers?
The amplifier delivers 100 W per channel at 8 ohms. For optimal operation, choose speakers whose power handling is at least equal to that of the amplifier. A speaker power greater than 100 W is recommended to avoid any risk of clipping.
How do I adjust the balance and tone?
Use the balance and tone (bass and treble) controls on the front panel. The balance distributes the volume between the left and right channels. The tone controls adjust the bass and treble frequencies according to your preferences. For a neutral sound, set them to the middle position.
Does the amplifier heat up normally?
Some heat is normal during operation, especially at high volume. The device is equipped with a cooling system. Make sure the vents are not blocked. If the device becomes extremely hot and turns off, check the ventilation and reduce the volume.
How do I avoid interference and humming?
Check that all connections are properly made and that the cables are of good quality. Keep audio cables away from power cables and sources of interference. If humming occurs, a ground loop may be the cause; use a ground adapter or a ground loop isolator. For the phono input, make sure the turntable ground is properly connected.
User questions about AMP204S CABASSE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Amplifier in PDF format for free! Find your manual AMP204S - CABASSE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMP204S by CABASSE.
USER MANUAL AMP204S CABASSE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CABASSE
Model : AMP204S
Category : Audio Amplifier