Beverly Wood - Chair Blumfeldt - Free user manual and instructions

Product type	Garden sun lounger
Main material	Aluminum with powder-coated finish
Cushion material	Textile (cushion cover)
Screws and fasteners	Stainless steel
Intended use	Private, in sitting or reclining position
Weather exposure	Must be protected from rain and moisture
Frost resistance	Not frost resistant
Cleaning	Clean water and soft brush; soapy water for stubborn dirt
Cushion care	Removable cover, hand wash only
Safety of use	Do not use as a ladder or gymnastics equipment
Assembly	On a mat, do not tighten screws before correct positioning
Paint protection	Repair scratches with paint to prevent rust
Winter storage	Cool, dry and frost-free place
Regular cleaning	Recommended to prevent wear
Accessories	Protective cover recommended

Frequently Asked Questions - Beverly Wood Blumfeldt

How do I clean my Beverly Wood chair?

Clean the outer cover with clean water and a soft brush. For stubborn dirt, use a little soapy water, then rinse with clear water. Never put the fabrics in the washing machine or dryer.

Can I leave my chair in the rain?

It is recommended to avoid prolonged contact with moisture and stagnant water. In case of rain, bring your chair inside or cover it with a protective cover. After a brief shower, slightly tilt the furniture and wipe off the moisture.

What is the material of the Beverly Wood chair?

The frame and associated parts are made of aluminum combined with a textile material. The screws are stainless steel and the frame has a powder-coated finish.

How do I assemble the chair correctly?

Assemble the parts on a mat to avoid damaging them. Only tighten the screws when all screws of the construction element are in the correct position. Use only in a sitting or reclining position.

Can I use the chair as a ladder or for gymnastics?

No, the chair is only intended to be used in a sitting or reclining position. It must not replace a ladder or serve as gymnastics equipment for children.

How do I protect the chair in winter?

Store the chair in a cool, dry and frost-free place. It is not winter-resistant. If it remains covered for a long time, make sure there is sufficient air circulation.

What should I do if the frame paint is damaged?

Use and transport can damage the paint. Repair scratches in time with a little paint to prevent rust from forming.

Can I machine-wash the cushions?

No, never put the fabrics in the washing machine or dryer. It is recommended to leave the cushion covers in place when cleaning and wash them by hand with water and a soft brush.

How do I prevent my chair from fading?

Protect the chair from excessive sun exposure when not in use. Intense solar radiation can cause discoloration of the surface.

Is the chair suitable for professional use?

No, the sun lounger and all associated parts are only intended for private use.

USER MANUAL Beverly Wood Blumfeldt

Beverlywood Rocking Chair

Sonnenliege

Sunbed

Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

Estimado cliente,

SICHERHEITSHINWEISE

The sun lounger and its parts are made of aluminium in combination with textile material. Sunbeds are exposed to environmental influences such as large temperature fluctuations, humidity and intense sunlight. To ensure that you enjoy your sun lounger for as long as possible, you should observe the following instructions:

• Avoid prolonged contact with moisture and standing water. Take your furniture indoors when it rains or cover it with a protective cover. After short rain showers, the furniture should be tilted slightly after the rain and the moisture wiped off. When covering for a longer period of time, ensure sufficient air circulation.
• We recommend that you leave cushion covers on the cushion when cleaning instead of removing them. Clean the outer cushion cover with clean water and a soft brush. Remove stubborn dirt with a little soapy water and then wipe with a clean cloth and clear water. Allow the cushions to air dry completely after cleaning or before storage. Never put the fabrics in the washing machine or dryer.
• Avoid contact with sunscreen or tanning products.
• The screws are made of stainless steel for greater durability. Do not tighten the screws too much.
• The frame is powder-coated. Use and transport can cause damage to the paintwork. Touch the paintwork up in time with a dab of paint to prevent rust.
• Protect the sun lounger from excessive sunlight when not in use, otherwise the colour may fade.
• Store the sun lounger in a cool, dry and frost-free place in winter. The sun lounger is not winterproof.
• Please use individual parts only for sitting or lying down. They are not suitable as a substitute for a ladder or as gymnastic equipment for children.
• The sun lounger and all associated parts are for private use only.
• Assemble the individual parts on a carpet so that they are not damaged during assembly.
• Do not tighten the screws until all screws of the component are in the correct position.

Note: To counteract premature fatigue of the material or contamination, regular cleaning must be carried out. Damage or contamination caused by insufficient care does not constitute grounds for complaint.

5

6

7

8

HERSTELLER

Berlin Brands Group UK Limited

PO Box 42

272 Kensington High Street

London, W8 6ND

United Kingdom