Tente Party Haven 3x4 - Reception tent Blumfeldt - Free user manual and instructions

Product Type	Reception Tent / Party Tent
Brand	Blumfeldt
Model	Party Haven 3x4
Dimensions	3 m x 4 m
Surface Area	12 m²
Roof Material	PE (Polyethylene) 170 g/m²
Roof Properties	Water-repellent, weather-resistant
Intended Use	Outdoor sun and light weather protection
Seasonal Use	Suitable for seasonal outdoor use
Installation	Requires at least 2 people, solid level surface
Anchoring	Must be anchored with pegs or weights
Wind Speed Limit	Remove roof cover above 50 km/h
Extreme Weather Resistance	Not for storms, heavy snowfall, or hail
Cleaning	Lukewarm water and mild soap only
Inspection Frequency	Twice per year and after severe weather
Safety Warning	Roof material is flammable; keep away from flames
Spare Parts	Original spare parts recommended
User Manual	Available in PDF, 16 pages

Frequently Asked Questions - Tente Party Haven 3x4 Blumfeldt

Is the Blumfeldt Party Haven 3x4 tent waterproof?

The roof is made of PE (polyethylene) with a water-repellent finish. It is not fully waterproof, so standing water should be removed to avoid fabric damage.

Can I leave the tent up in winter?

The tent is suitable for seasonal outdoor use and not for extreme conditions like snow or storms. You should remove heavy snow loads immediately and inspect the structure regularly.

How should I clean the tent roof?

Clean the roof with lukewarm water and mild soap. Do not use solvents, bleach, or high-pressure cleaners.

What wind speed is the tent designed for?

The tent should be secured properly. In winds exceeding 50 km/h, you should remove or securely fasten the roof cover to prevent damage.

Do I need more than one person to set it up?

Yes, assembly should be done by at least two people to avoid injury and ensure stability.

Can I use the tent for events with grills or candles?

No, the roof material is flammable. Keep a safe distance from open flames, grills, or heating devices. Do not smoke or use candles directly under the roof.

How often should I inspect the tent?

Inspect all screws, bolts, and anchoring points twice per year and after severe weather. Tighten any loose connections immediately.

What kind of surface is suitable for installing the tent?

Mount the tent on a solid, level, and load-bearing surface such as concrete, stone, or reinforced decking. Ensure there are no hidden utility lines.

Can I hang decorations or lights from the frame?

Avoid attaching heavy decorations or lights that may exceed the design load. If electrical accessories are used, they must comply with Low Voltage Directive 2014/35/EU and be installed by qualified electricians.

Are spare parts available for this tent?

Replacement parts should be original spare parts to maintain safety certification. You can find them through the manufacturer or authorized dealers.

USER MANUAL Tente Party Haven 3x4 Blumfeldt

Party Haven 3x4

Partyzelt

Party Tent

Carpa para eventos

Tente de soirée

Tenda da party

Dear Customer,

Congratulations on purchasing this product. Please read the following

instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

Estimado cliente,

General safety instructions

• Please read this manual carefully before installation and use.
• Keep all documentation for future reference and provide it to any future owner.
• This tent is intended solely for domestic outdoor use as sun and light weather protection.
• Any modification or improper installation may cause structural failure or injury.
  • Children and pets must be supervised around the tent at all times.
• Do not climb or play on the frame, especially near corners or supports.
• The PE roof material is flammable — keep away from open flames, grills, or heating devices.
• Maintain a safe distance from any heat source to avoid fire hazards.
• Do not smoke or use candles directly under the roof.
• Improper installation, use of non-original parts, or disregard of these safety instructions may void the warranty.
• The manufacturer accepts no liability for damage or injury resulting from misuse, overloading, or severe weather conditions.

Notes on installation and assembly

• Installation must be carried out by competent persons familiar with general assembly and anchoring methods.
• Mount only on a solid, level, and load-bearing surface such as concrete, stone, or reinforced decking.
• Ensure the ground is free from hidden electrical, gas, or water lines before anchoring with pegs or weights.

• Use only the original fasteners and anchors supplied or approved by the manufacturer.

• Assemble the structure with at least two people to avoid injury and ensure stability.

• During assembly, avoid windy conditions and ensure all parts are temporarily secured.
• The tent must be properly anchored and secured to prevent movement or lifting by wind.
• This product is suitable for seasonal outdoor use, but not for extreme conditions such as storms, heavy snowfall, or hail.

Notes on operation

• In wind speeds exceeding 50 km/h, remove or securely fasten the roof cover to prevent damage.
• The PE roof material (170 g/m ² , weather-resistant) is water-repellent, not fully waterproof. Remove standing water to avoid fabric damage.
• Do not climb, sit, or hang objects on the frame or roof.
• Avoid attaching heavy decorations, lights, or planters that may exceed the design load.
• Keep all joints and connectors clear of obstructions.
• If fitted with electrical accessories (e.g. lighting), they must comply with Low Voltage Directive 2014/35/EU and be installed by qualified electricians.

Notes on maintenance and inspection

• Inspect all screws, bolts, and anchoring points twice per year and after severe weather.
• Tighten any loose connections immediately.
• Clean the PE roof only with lukewarm water and mild soap. Do not use solvents, bleach, or high-pressure cleaners.
• Remove leaves, dirt, and snow accumulation promptly to maintain stability and prevent corrosion.
• Lubricate moving or hinged parts with non-resinous lubricants.
• Replace damaged parts only with original spare parts to maintain safety certification.
  • Perform a seasonal inspection (spring and autumn).
• Remove heavy snow loads immediately.
• Apply corrosion protection annually if the structure is exposed to sea air or de-icing salts.