If your SMEG FAB32RRD5 freezer is not cooling well or sufficiently, here are the checks to make before calling a technician:
Emergency Checks
- Clear the air vents - Check that nothing is blocking the air circulation openings between the fridge compartment and the freezer. Food, ice, or objects can obstruct the flow of cold air and reduce the cooling of the freezer.
- Check the condition of the seals - Inspect the door seal of the freezer. If it is worn, damaged, or coming off, warm air enters and the temperature rises. The seals on this model can be easily replaced.
- Check the damper - The damper is the flap that regulates the airflow to the freezer. If it is blocked or broken, cold air will not flow into the freezer. Clean it or have it replaced if defective.
- Adjust the thermostat - Ensure that the temperature dial (or digital display if electronic model) has not been accidentally turned down. The freezer should be set to around -18°C minimum to freeze properly.
If the problem persists after these checks, it may be a more serious issue: worn compressor, refrigerant circuit leak, or faulty solenoid valve. In this case, contact an authorized SMEG service technician.