SCN-600 - Effect machine Antari - Free user manual and instructions

Product Type	Snow Special Effect Machine
Brand	Antari
Model	SCN-600
Power Supply	230V AC, 50Hz
Power Consumption	600W
Snow Output Volume	Adjustable, up to 50 cubic meters per minute
Fluid Tank Capacity	5 liters
Fluid Consumption	Approximately 0.5 liters per minute at full output
Dimensions (L x W x H)	420 x 280 x 330 mm
Weight	9.5 kg
Housing Material	High-grade polyurethane
Control Mode	Manual control panel and wireless remote controller
Remote Controller Range	Up to 50 meters
Fluid Type	Antari SL-3000 snow fluid
Warm-up Time	Not applicable (no heating element)
Operating Temperature	5°C to 40°C
Maintenance	Regular cleaning of nozzle and fluid pump
Safety Features	Thermal protection fuse, low fluid level indicator
Repairability	Spare parts available: pump, fan, transformer, PCB
Included Accessories	Wireless remote, power cord, fluid testing bottle
Certifications	CE, RoHS
Warranty	1 year standard warranty

Frequently Asked Questions - SCN-600 Antari

What type of fluid does the Antari SCN-600 use?

The SCN-600 is designed to work exclusively with Antari SL-3000 snow fluid. Using other fluids may cause clogging or damage to the pump and nozzle.

How do I use the wireless remote control?

Make sure the remote is powered and within 50 meters of the machine. Press and hold the power button on the remote to start snow output; release to stop. The manual control panel offers the same functionality.

Can I use regular water instead of snow fluid?

No, using water is not recommended. Water lacks the foaming agents needed to create the snow effect. It will also lead to pump wear and potential internal damage. Always use the specified snow fluid.

Why is the machine not producing snow?

Check if the fluid tank is empty, the nozzle is clogged, or the power cable is securely connected. Also verify that the remote battery is fresh and that the machine is turned on via the main switch.

How do I clean the SCN-600 after use?

Turn off and unplug the unit, then remove any residual fluid. Run a cleaning solution (e.g., a mixture of water and a few drops of neutral detergent) through the system for a few seconds. Wipe the exterior with a soft, dry cloth and store in a dust-free environment.

What are the power requirements for the SCN-600?

The SCN-600 requires a single-phase 230V AC supply at 50Hz. It draws up to 600 watts. Ensure the connected circuit is rated for this load and uses a grounded outlet.

How long can I run the machine continuously?

The SCN-600 is designed for intermittent use. For continuous operation, run it for no more than 30 minutes, then allow a 10-minute rest to prevent overheating and extend pump life.

How do I adjust the snow output volume?

Use the output dial on the control panel to adjust the pump speed. Turning the dial clockwise increases the snow output, while counterclockwise reduces it. The remote control only toggles on/off, not the volume.

Is the machine safe to use outdoors?

Yes, the SCN-600 can be used outdoors, but it should be protected from rain, extreme temperatures, and strong winds. Use a weatherproof enclosure if necessary and keep the electrical connections dry.

What should I do if the low fluid indicator lights up?

The low fluid indicator alerts you that the fluid level is critically low. Turn off the machine immediately, unplug it, and refill the tank with Antari SL-3000 snow fluid. Running dry can damage the pump.

USER MANUAL SCN-600 Antari

1. Introduction ....1
2. Safety Information ....1
3. Package Contents & Inspection....2
4. Machine Details....2
5. Technical Label Information ....3
6. Essence Oil....3
7. Setting and Manual Operation....3
8. Control Settings ....3
9. DMX Connection....4
10. Service and Maintenance....5
11. Technical Specifications....5
12. Warranty Disclaimer ....6
13. Machine Dimension ......6
14. 前言 ....7
15. 安全注意事項....7
16. 包裝內容與檢查....8
17. 機器訊息....8
18. 技術標籤資訊....9
19. 精油 ..... 9
20. 設定與手動操作說明....9
21. 控制設定....9
22. DMX 說明.....10
23. 維護和保養....11
24. 技術規格....11
25. 保固聲明....11
26. 機器尺寸圖....12

Appendix I – Grounding Instruction....13

SCN·600 SCENT MACHINE

User Manual

1. Introduction

Please read all the user manual before operating the machine, and place the manual where the user can refer to it at all time. The manual includes how to install and operate the machine under safe condition and explain all the labels printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.

2. Safety Information

	DANGER	If the danger is not avoided, it will cause death or serious injury
	WARNING	If the warning is not heeded, it can cause death or serious injury.
	CAUTION	If the precaution is not taken, it may cause minor or moderate injury.

DANGER

• Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may cause serious consequences.
• Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of electrocution. For grounding instruction, please refer to Appendix I on page 13.
• Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
• When operating the machine, do not point at people, animals, or fire.

WARNING

• Please keep at least 50cm distance from the nozzle when the machine is running.
• Please operate the machine on a flat, level hard and well-ventilated surface area, reserve at least 50cm space around the machine and make sure there is no flammable gas or material nearby.
• Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock or result in fire.
• The machine can only be operated by adults or professionals, is not intended for use by person with reduced physical sensory, mental capabilities, or lack of experience and knowledge including children.
• Do not leave the machine running unattended, make sure all powers are off when leaving.
  ● Children should be supervised to ensure that they do not play with the machine.
• Do not use the machine upside down or tilt it, it might cause damages or malfunction.

CAUTION

• Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or moisture environment.
• Please make sure the power outlet is not damaged or loose before plug in the power cord.
• If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be void.
  ● Before operating the machine, please make sure the essence oil is filled in the canister to avoid the pump in

idling state which could lead to overheat or malfunction.

● Before transporting the machine, please make sure the fluid is drained and the canister is empty. (Recommend using original package)

● The machine is for indoor use only.

- Do not operate the machine in any area with unstable voltage.

- If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately and contact your local Antari dealer for assistant.

- Do not contact any moving part.

● Only use accessories recommended or sold by Antari.

- Please make sure the power is off when not using the machine and unplug the power cord if not intend to use for a long period of time.

● To disconnect, turn all controls to the off position, then remove plug from outlet.

- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

● Unplug from outlet before servicing or cleaning.

- Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

● To ensure the lifespan of the machine, please only use the essence oil manufactured by Antari, do not use other fluid or additive, otherwise it may clog the heater and cause malfunction.

3. Package Contents & Inspection

3.1 Package Contents

Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct model and all parts are included. If any part appears to be damaged or missing during transportation, please contact your local dealer and return in original package for inspection.

1 x SCN-600 Scent Machine

1 x 150ml Canister

1 x IEC Power Cable

3.2 Optional Accessories

Item Code	Description
N/A	N/A

4. Machine Details

01. Fluid Level	04. Power Switch
02. Nozzle	05. IEC Power Connector
03. Onboard Digital Control Interface	06. XLR 5-Pin Connector DMX

5. Technical Label Information

Please read the technical label information on the back of the machine before operating it.

6. Essence Oil

CAUTION

Always turn off the power before filling the fluid tank. Do not add flammable liquid to the fluid tank. If fluid gets inside the machine, please contact your loca Antari dealer for assistant.

• Only the essence oil manufactured by Antari can be used, do not mix or dilute the essence oil. Due to improper storage or using other fluid might cause malfunction.
  ● The machine is tested and calibrated with the specific essence oil to get the best performance.
• Please empty the canister before switching to another fluid to avoid mixing.
  ● Only the essence oil manufactured by Antari can be used.
  ● The warranty on your machine will be void if you use essence oil not manufacture by Antari.

7. Setting and Manual Operation

WARNING

Machine falling off might cause serious injury, please make sure it is secure and firm on the overhead.

Step 1. Place the machine on a flat, level hard and well-ventilated surface area and reserve at least 50 cm open space around the machine, and make sure there is no flammable gas or material nearby;
Step 2. Fill the cannister with Antari approved essence oil;
Step 3. Connect the machine to the power outlet. Please read the technical label on the back of the machine and make sure the power outlet is the correspond to the rated voltage for the machine;
Step 4. Turn on the machine, and it is ready for operation;
Step 5. Please read "8. Control Setting" to operate the machine;
Step 6. To turn off the machine, please make sure the machine is not operating then turn off the power. If you will not use the machine a long period of time, please remove the power cord.

8. Control Settings

SCN-600 Scent Machine can be operated in the following modes. The machine can only accept 1 type of signal at a time. When using different control modes at the same time, the machine will work according to built-in control priority as follow:

• Manual
• Timer
• DMX512

8.1 Control Panel Description

SCN-600 Scent Machine can be operated with the onboard digital control interface.

Button	Operating Method	Action
	Press	Enter menu
	Press	Up/Increase Value (MENU)
	Press	Down/Decrease Value (MENU)
	Press	Start in TIMER mode according to the set time
	Press	Start in VOLUME mode according to the set volume
	Press	1. Leave setting menu2. Stop

8.2 Menu Options Description

Options	Description
DMX 512 Address: xxx	Set DMX Address from 1 – 512
Interval Set xxx s	Set Interval from 1 – 360 seconds
Duration Set xxx s	Set Duration from 1 – 360 seconds
Run Last Setting On	ON/OFF

9. DMX Connection

9.1 DMX Connector Pin Assignment

This machine has a XLR 5-Pin connector for DMX connection. The diagram below indicates pin assignment information;

5 Pin XLR

Pin	Function
1	Ground
2	Data-
3	Data+
4	N/A
5	N/A

**There is a protection cap on DMX IN, please remove it with your finger before operation.

9.2 DMX Channel Function

Channel Mode		DMX Value Range	Function
Channel 1	Output	0 – 5	Scent Off
		6 – 255	Scent On

10. Service and Maintenance

DANGER

Disconnect the power cord before starting maintenance operation.

● Always keep the machine clean and dry.
● Can use air compressor, vacuum or a soft brush to remove the dust on the machine.
● Can use a slightly damp cloth to clean the casing.
- Before store the machine, please make sure the machine is completely cool down to avoid moisture inside causing malfunction.
- It is recommended to run the machine at least once a month in order to maintain the machine's best performance and output condition.
● Excessive dust and build up liquid residue will reduce the performance and cause overheat.

11. Technical Specifications

	SCN-600
Input Voltage	AC 100V – 240V 50/60Hz
Rated Power	7W
Fluid Consumption	1 ml/hour (100% output)
Fluid Tank Capacity	0.15 Liters (0.04 Gallon)
Compatible Essence	Antari Essence Oil Series
Ambient Temp. Range	0°C – 40°C (32°F – 104°F)
Control Methods	Manual、Timer、DMX512
Interface	XLR 5-Pin Connector (DMX)、IEC Connector (Power)
DMX Channels	1 Channels
Included Accessories	N/A
Optional Accessories	N/A
Dimension	L 267 W 115 H 222 mm (L 10.52 W 4.53 H 8.74 inch)
Weight	3.2 kg (7.10 lbs.)

12. Warranty Disclaimer

We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in connection with the use, sale, or repair of any merchandise purchased from us.

13. Machine Dimension

SCN·600 SCENT MACHINE

中文使用說明書

1. 前言

9.2 DMX 通道功能

Appendix I – Grounding Instruction

This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal screw.

< D>