MAT150 - Uncategorized Herkules - Free user manual and instructions
Find the device manual for free MAT150 Herkules in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Table Saw |
| Brand | Herkules |
| Model | MAT150 |
| Power Supply | 230 V ~ 50 Hz |
| Motor Power | 1500 W |
| No-Load Speed | 4800 rpm |
| Blade Diameter | 250 mm |
| Cutting Depth (90°) | 70 mm |
| Cutting Depth (45°) | 50 mm |
| Table Size | 640 x 480 mm |
| Overall Dimensions (L x W x H) | 850 x 600 x 350 mm |
| Weight | 25 kg |
| Parallel Stop | Included |
| Push Stick | Included |
| Blade Guard | Yes |
| Dust Port Diameter | 35 mm |
| Sound Level | 90 dB(A) |
| Cleaning | Use a soft brush and vacuum |
| Blade Maintenance | Keep sharp and free of resin |
| Spare Parts | Available from manufacturer |
Frequently Asked Questions - MAT150 Herkules
How do I change the saw blade on my Herkules MAT150?
To change the blade, first unplug the saw. Tilt the blade guard, use a wrench to loosen the arbor nut, remove the outer flange and old blade. Install the new blade with teeth pointing downward at the front. Reassemble in reverse order. Always use a blade with the correct diameter and bore.
What is the maximum cutting depth of the MAT150?
The maximum cutting depth is 70 mm at 90 degrees and 50 mm at 45 degrees. This allows cutting standard lumber and panels easily.
How should I connect a dust extraction system?
The saw has a 35 mm dust port. Connect a compatible vacuum or dust collector hose to the port and ensure a tight fit to minimize dust leakage during operation.
Why does my saw motor not start?
First, check that the power cord is plugged into a working outlet. Then inspect the power switch and the circuit breaker. If the motor does not start, the carbon brushes may be worn and need replacement. Contact a qualified electrician if the problem persists.
Can I cut metal with the MAT150?
No, the table saw is designed for wood and wood-based materials only. Using it on metal can damage the blade and create dangerous sparks. Use an appropriate cutting machine for metal.
How do I adjust the parallel stop?
Loosen the locking knob, slide the stop to the desired distance from the blade, and tighten the knob. Check the alignment with a try square before cutting to ensure accuracy.
What regular maintenance does the saw require?
Regularly remove sawdust from the table and interior. Keep the blade clean and sharp by using a blade cleaner. Check the belt tension (if applicable) and ensure all bolts are tight. Lubricate moving parts occasionally.
Are spare parts available for this model?
Yes, spare parts such as blades, carbon brushes, and stops can be ordered from the manufacturer's service network. Use only original parts to maintain performance and safety.
What safety precautions should I take when using the MAT150?
Always wear safety goggles and hearing protection. Use the blade guard and push stick for narrow cuts. Keep hands away from the blade. Never operate the saw without the riving knife and guard in place. Disconnect power before changing accessories.
How can I ensure precise 45° cuts?
Tilt the saw blade using the bevel adjustment handle, check the angle with a digital protractor or square, and tighten the locking knob. Make a test cut on scrap wood to verify the angle before working on your piece.
User questions about MAT150 Herkules
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MAT150 - Herkules and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MAT150 by Herkules.
USER MANUAL MAT150 Herkules
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Herkules
Model : MAT150
Category : Uncategorized