MH 725 H - Tiller Herkules - Free user manual and instructions
Find the device manual for free MH 725 H Herkules in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tiller |
| Engine Type | 4-stroke, single-cylinder, OHV |
| Engine Displacement | 196 cc |
| Power Output | 6.5 HP (4.8 kW) |
| Working Width | 90 cm (35 in) |
| Working Depth | 25 cm (10 in), adjustable |
| Tine Type | 4 hardened steel tines, reversible |
| Transmission | Chain drive with forward and reverse gears |
| Weight | 68 kg (150 lbs) |
| Fuel Tank Capacity | 3.6 L (0.95 gal) |
| Oil Capacity | 0.6 L (0.63 qt) |
| Start System | Recoil start |
| Wheel Type | Pneumatic tires, 16 in diameter |
| Handle Type | Adjustable with ergonomic grips |
| Safety Features | Engine kill switch, tine guard, operator presence control |
| Maintenance Intervals | Oil change every 25 hours, air filter every 10 hours |
| Warranty | 2 years limited |
Frequently Asked Questions - MH 725 H Herkules
What type of fuel should I use?
Use unleaded gasoline with a minimum octane rating of 87. Do not use ethanol blends above E10.
What oil is recommended for the engine?
Use SAE 10W-30 engine oil for general temperatures. For cold climates, SAE 5W-30 is recommended.
How do I change the tines?
Remove the cotter pins and slide off the old tines. Install new tines with the sharp edge facing the direction of rotation, then secure with cotter pins.
Why won't the engine start?
Check fuel level, ensure the kill switch is in the 'ON' position, set choke to 'COLD', and pull the starter cord firmly. If still not starting, check spark plug condition.
How deep can I till?
The maximum working depth is approximately 25 cm (10 inches). Adjust the depth stake to control tillage depth.
How do I maintain the air filter?
Clean the foam pre-filter every 10 hours with soapy water and re-oil. Replace the main paper filter annually or when damaged.
What should I do for winter storage?
Drain fuel or add stabilizer, run engine until carburetor is empty, change oil, clean tines, and store in a dry place.
Is the tiller safe to use on slopes?
Avoid slopes steeper than 10 degrees. Always till across slopes, not up and down, and keep hands and feet away from tines.
Where can I find replacement parts?
Contact Herkules customer service or authorized dealers. Common parts like tines, belts, and filters are available online.
How do I adjust the handle height?
Loosen the handle adjustment bolts, tilt the handle to desired position, and retighten the bolts securely.
User questions about MH 725 H Herkules
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tiller in PDF format for free! Find your manual MH 725 H - Herkules and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MH 725 H by Herkules.
USER MANUAL MH 725 H Herkules
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Herkules
Model : MH 725 H
Category : Tiller